home » Decor » Donka on bream from the shore. Fishing for bream

Donka on bream from the shore. Fishing for bream

My opinion is that even on medium or large rivers, in lakes, bream fishing is more promising on the bottom, which has more advantages over fishing on a float rod, especially if there is a current or a strong wind.

In general, the most popular are two options for catching bream on the bottom with baiting in the course. This is stationary fishing, and the second option is fishing on a running bottom, when the feeder carried by the current distributes the bait evenly over a large area.

When you fish permanently, the fish gather at a bait point, which attracts a plentiful trail of bait. It is on such fishing that you can catch the largest specimens of fish that lead a flock and are the first to approach the bait. Feeders from sixty to one hundred grams are used. But with a running donk, bites will be more frequent, but large specimens will not always come across. At the same time, the feeders put about forty grams, and you also need to have sensitive tackle in order to see the touch of the fish, even though the feeder is shifting in the current. With such fishing, put a leash from thirty to fifty centimeters long.

The nozzle is usually made of bloodworms, red worms, maggot larvae, but the fish may also prefer steamed barley, peas, wheat, lupins. So you need to experiment. As an attractant, I recommend using vanillin, bitter almonds, hemp.

It must be remembered that if your bait is in the water column, well, or slightly above the bottom, then the fish may be alert, at this moment it will take the bait with more caution, but the bait lying on the bottom, the bream will take bolder, regardless of the thickness of the fishing line and hook size. After all, he can take the fishing line that lies at the bottom for garbage, the roots of algae lying at the bottom, tree branches.

Do not forget that the bream loves a large bait and he will be sure to take it on the bottom if you have a long leash that will not interfere with the bite, its free play should be up to half a meter, and up to forty centimeters in a stagnant pond, as well as the presence bait. Without bait, it is very difficult to get the bream to approach the baited hooks.

And, of course, I wish every angler: no tail, no scales!

How to catch bream with bottom rods

The bream is a fairly common breed of fish, which is the prey of many anglers. It belongs to the carp family, but is the only representative of its kind. It is distinguished from other fish by a higher level of intelligence, which makes most individuals very cautious and shy. Such behaviors often complicate the process of catching, so a number of precautions must be taken when fishing in order not to frighten away potential prey.

The bream can be described as follows:

The maximum body length and weight are 80 cm and 6 kg, but in most cases smaller individuals are found.
The body is quite high and has a shape flattened on the sides, the head seems small against its background.
The mouth is also small, but due to some anatomical features of its structure, this fish can easily find and get food for itself in dense underwater thickets or on the surface of the bottom of a reservoir.
There are 2 fins on the back, differing in size and shape of the rays.
All teeth are located in one row, on each side there are 5 pieces.
The color of the surface of the back can be grayish or brownish, depending on the living conditions.
The sides differ from the back in color, usually they are more golden in color.
The ventral region has a distinctive yellowish color.
All fins are gray in color with black edges.
There are young fish in which the whole body is entirely painted silver, but with age the color changes to the one described above.

Shape, color and other features appearance make the bream a very recognizable fish, so the likelihood that it will be confused with other inhabitants of the reservoirs is minimized even for novice anglers.

habitats

Bream can be found in many water bodies, this breed is widespread throughout the European territory, except for some western and most southern regions. Many populations penetrated and took root in the Siberian rivers, so today their representatives can be found in the waters of the Yenisei, Ob or Irtysh.

In the conditions of the Far North, as well as in the southern countries of the CIS, this fish is completely absent.

Depending on the characteristics of the chosen habitats, 2 main varieties of bream can be distinguished:

Residential the fish does not have a tendency to frequent migrations, so it lives in the same reservoir for a long time, as long as there is food in it, and the conditions are appropriate.
Semi-through fish does not have the habit of staying in one reservoir for a long time, for this reason it does not have a permanent habitat. Such individuals are characterized by continuous migrations, the most significant distances begin to be overcome before the start of the spawning period.

Biting calendar by fishing seasons

The bite of bream at different times of the year varies significantly, which has a tremendous impact on the specifics of catching this fish.

In order to make it easier to deal with this issue, below are all the features of this process, depending on the specific season:

Features of catching bream on the donk: fishing spots

Universal fishing spots does not exist, since this prey can change its location throughout the season depending on the individual characteristics of a particular season or current time of day.

The main tips for finding bream in specific places are given below:

How to increase the catch of fish?

For 7 years of active passion for fishing, I have found dozens of ways to improve the bite. Here are the most effective ones:

Biting activator. This pheromone additive attracts fish the most in cold and warm water. Discussion of the Hungry Fish bite activator.
raising gear sensitivity. Read the appropriate manuals for the particular type of tackle.
Lures based pheromones.

Bottom gear rigging

It is the most common and effective technique, but to get an impressive catch, the rod will need to be properly equipped.

All the features associated with this process will be discussed in detail below:

Rod length does not really matter, so you can take short gear up to two meters or longer models. The main requirements are that it must withstand the mass of equipment used and jerks of production, otherwise it will a large number of gatherings of fish that will not allow you to get a big catch.
Coil any one can be installed, even a budget one made in China. Casts will be made extremely rarely, a significant part of the fishing process consists of waiting for a bite, so there are actually no requirements for this device.
However, the use of higher quality reels allows you to expand the possibilities and catch not only bream, but also bream and other small breeds.
fishing line is selected with an average diameter, its indicator can vary from 0.2 to 0.3 mm. The choice of a particular option depends on the fishing conditions, working depth and weight of the rest of the equipment. It is also necessary to focus on the swiftness of the current in the chosen place: the slower it is, the thicker the line used should be.
should be thinner than the working line, its diameter can be 0.1-0.2 mm, and the length varies from 5 to 10 cm.
Hook size is selected depending on the expected dimensions of the prey, but they must be of high quality, since self-cutting fish will be practiced. At the same time, one should not take too small ones, this will minimize bites from a very small bream. It is recommended to have a set of various devices, which will allow you to quickly change the equipment in the absence of bites.

Installation of bottom gear: a step-by-step process

Mounting gear can be done in various ways, but it must be remembered that the presence of a large number of nodes can greatly weaken the equipment.

Therefore, it is recommended to use the most reliable option:

The end of the working line is threaded through the sinker, which must be of a sliding type. The recommended form is a drop or an olive.
The weight is fixed with a cambric made of rubber on the side of the hook, but other types of stoppers can be used at your discretion.
It is necessary to check the reliability of fixing the selected stopper, since it is the most vulnerable part of the equipment. If its quality is in doubt, then you can use a pellet with a soft structure made of lead.
An alternative option is to knit a swivel, which is carried out immediately after threading the weight. A leash with the selected hook is already tied to it.
At the final stage, the hook is tied to the working line, the only knot in this version of the equipment is knitted specifically for this purpose.

Bream Bait Recipes

Feeding the chosen fishing spot is one of the most important steps, because the bream remembers the places where a large amount of food was found and then often returns to them.

It is recommended to prepare bait mixtures that combine ingredients of plant and animal origin, they are especially effective in the summer, when the main growth of fish is observed, which contributes to a more active consumption of food.

One of the recipes:

The basis of the mixture will be millet, which is pre-cooked and then mixed with sunflower in equal proportions, the recommended amount of components is 300 g each.
Bran is added to the resulting mass in a volume of about 200 g.
Bloodworms can be used as an additive of animal origin, about five matchboxes are taken.
Sand or clay is added as a compactor, it is recommended to take them directly from the reservoir where the bream will be caught, because in this case the bait will have its usual aroma and will not cause any particular suspicion.

Alternative cooking option bait mixture to attract bream:

The basis of the mixture is boiled buckwheat, which is taken in an amount of 0.5 kg. This component is quite nutritious, so the bait will need to be used in minimal quantities so as not to overfeed the prey, which may be satiated and not show interest in bait.
About 300 g of bran and about 250 g of sunflower meal are added to the base, which will create a dust cloud in the reservoir that will attract bream even from a long distance.
An additive of animal origin will be in the amount of three matchboxes and a bloodworm in the amount of five matchboxes.
Clay or sand is also used as a sealant, the requirements for these ingredients remain the same.
About 3 tsp can be used as aromatic additives. pre-ground coriander or 100 grams of breadcrumbs, it is good if they have a vanilla smell, which the bream finds very attractive.

The nuances of choosing bait

The bream is an omnivorous species of fish that may take an interest in virtually any bait of plant or animal origin. Usually he bites well on the dough with the addition of a small amount natural honey, various insects or their larvae.

At the same time, prey preferences depend on many factors, and it is impossible to predict them in advance, so it is recommended to take into account the following features:

Technique and tactics of catching bream on the bottom

When using, there are several rules that determine the specifics of fishing:

The choice of location is carried out according to the standard scheme, but it must be borne in mind that fishing with the help of a donkey is most effective on headlands that flow into the river, and also deviate the direction of the flow to the opposite coastline.
Bottom tackle is well suited for fishing in deep underwater pits, as well as along the edges of dense thickets.
Fishing for bream from rafts to the bottom is also often a very effective technique.
Casts must be point and carried out in pre-baited places, this is a must.
Casts must be made slowly, but at the same time they must be sweeping. Such precautions ensure the safety of equipment, which usually has an impressive weight.

With a decrease in the number of bites, re-baiting of the place is required, but it is necessary to be able to correctly determine the volumes of portions used, since overfeeding the bream can also negatively affect the fishing process.

When fishing from a boat, casts must be made 10 meters from the boat or further, otherwise cautious prey will prefer to keep their distance.

On the bottom tackle, mostly promising in medium and large rivers, although waters with still water are also suitable, but only under conditions of strong wind or wind flow, fishing will have an advantage over conventional float fishing.

However, when fishing in the current, there is usually a choice of two types of bait fishing. The first one is stationary fishing for this fish on the bottom and the second - catching bream on a running bottom, but only in the latter case, instead of a garland of pellets, a feeder is used.

This is done in order to evenly distribute the bait over the entire wide zone during the demolition by the current, calmly moving from the place (point) of falling into the water to the very edge of the fairway. Because during stationary fishing, this fish is attracted by a pleasant fragrant trail emanating from the bait, which is why it is in a hurry to gather at one point as quickly as possible.

With this type of fishing, the fisherman has the right to count on the bite of large individuals, which often go at the head of the flock, and therefore, as a rule, they are the first to fall for the bait. But in the second option, better and more frequent bites will go, with the only difference being that the size of the trophies received will be much more modest.

So, suitable for stationary fishing heavy feeders(whose weight is from 60 to 100 grams), plus nods-tops, which are designed for casting cargo (weight starts from 2 and stops at around 4 ounces). The entire tackle should be more sensitive and softer, as this will allow you to register even the most subtle touches of the bream on your bait, and this, despite the fact that it will move along the fairway. However, with such a catch the length of the leash cannot exceed 30 - 50 cm.

But bait for fishing this fish is mainly composed of crimson worms, but fit ... larvae maggot or bloodworm, although sometimes, the bream wants to pamper itself with steamed grains of barley, lupine, peas and wheat. In addition, you need to add what you are going to catch to the composition of the bait. So when fishing for bream ... of the attractants, hemp, bitter almonds and vanillin have a good reputation.

All in all, fishing for bream no less popular than any other fishing for other types of gear. After all, this tackle can be caught during the entire season, the so-called open water, especially since using this tackle, as a rule, you get big bream!

This happens for the simple reason that during the day large individuals behave extremely carefully, and quite rarely approach the shore, therefore it is necessary to cast the nozzle over longer distances. Because of what, catching this fish on the bottom is much more convenient and practical in case of bad conditions. weather conditions, namely: with a big wave or a strong wind. Also, we must not forget that fishing on the bottom with a feeder is endowed with its own characteristics when fishing on reservoirs with stagnant water, and, for example, when fishing in the current.

Fishing on a donk in a big current

For catching bream on the bottom in a large current, a wire spring is made (stainless steel is most suitable). Its diameter is only 1 millimeter, plus a rectangular or square lead weight, in addition to this, in the sinker, first of all, there must be a hole for the tube, and, of course, two fasteners for the stopper whiskers, which will prevent the feeder from being carried away by the current.

Next, with the help of nylon threads, we attach the spring to the tube, then after it we attach the load itself, and if you, right, choose the size for the hole, then the weight will fit very tightly onto the tube and will not fly off it. After, to prepare the mustache, you need two pieces of wire (each 6 cm long), bend them, repeating the shape of the letter "P". Insert them into the sinker so that they stick out in the opposite direction, and in no case should the feeder slipped off, tie a carabiner to the end of the fishing line to attach the hook (cambric will work well too).

In addition, another option for a bream feeder can be a mesh feeder. This feeder is made of a thin nylon mesh with tiny cells, and a thread can be inserted into it on both sides for tightening. It is important to remember that fishing for bream on the bottom in the current usually works when using baits that hold perfectly on the hook. For example: maggot, dung worm, or the meat of river shells. Unlike vegetable baits, they are very quickly washed away by the current and leave behind only empty hooks, which the fish are unlikely to pay attention to.

These options for feeders, except for bream, are great for fishing for crucian carp or carp.

Fishing for bream in still water

One of the features of catching bream on a donk in stagnant water is the ability to put on such donks not one, but several hooks at once, because due to the absence of a current they will not be confused with each other. Hooks can be well attached to the coils of the spring and removing the weight, cut and solder the extra ends of the tube.

The spring must be filled with dense bait, suitable weight for casting over long distances. So, the main fishing line will be about 0.3 - 0.4 mm thick, but do not forget to make hook leads from fishing line, the diameter of which will be 0.25 mm. In this case, it is best to make the feeder removable. Then, if you wish, change the point of fishing, you can change it very quickly.

It will not be superfluous to know that not every coast is convenient for casting long tackle, because sometimes branches growing above the water can interfere. Therefore, the rod should be taken with a length of no more than two meters, since in the end it will not only not make casting very difficult, but will also help to make it, even in not very convenient places. Usually for bottom bream fishing, you need a fairly stiff rod that allows you to easily cast, even a heavy feeder. It will not be superfluous to equip the rod with high-quality and good guides. They will prevent the grinding of your fishing line.

In addition to the rod, special attention should be paid to the reel. After all, it must have a highly reliable friction brake, plus a soft ride.

To determine bites, two options (types) of signaling devices are used. In the first case, this is a nod, which is dressed on the tip of the rod, because due to its sensitivity it is well suited for weak bites. However, it has one small drawback: if you follow it for a long time, your eyes will get very tired.

The second option is a fifteen-centimeter tube with a bell. It is usually hooked onto a fishing line between the access rings. Here, the main drawback will be a weak sensitivity to bites. Basically, you will notice the beginning of a bite by a slight trembling of the rod tip, and only after that, finally, the signaling device itself deigns to work.

In the case when it is supposed to catch bream on the bottom at night, you will have to attach glow sticks to the signaling device. In addition, you also need to remember that using the right bait, you will definitely get a successful fishing trip.

Note to anglers: equipment for beauty salons - hairdressing chair

I think that you will agree with me if I say that the bream donka is as popular among fishermen as other types of gear. It is clear that the very name of the tackle indicates that the place for catching bream will be at the bottom. What is good about donka for bream is that you can catch this fish with it, almost all year round.

As a rule, in the daytime, trophy bream is at a depth, preferring not to approach the coastline. That is, it makes sense to use tackle that makes it possible to cast far. In addition, the donka is also good because it allows you to fish for bream in any weather, since the tackle is practically all under water.

Most often, a donk with feeders is used today, thrown over long distances into the water with the help of small, but very powerful rods.

Fishing for bream in the course of the Donka

I must say that fishing for bream with a donkey in still water is a little different from fishing for it in places with a current, and this is quite understandable.

For fishing in the current, you will need the following donkey design. It is based on a spring feeder (wire diameter is about 1 mm). In principle, it is inexpensive and you can just buy it. The sinker should be flat, rectangular or square (to keep the current well), with a hole for the tube, as well as holes for the stopper whiskers. Stopper mustaches are needed to prevent the drift of the tackle by the current.

The tackle itself consists of a leash 12-14 cm long. The basis of our leash will be a fishing line with a diameter of 0.2 mm, you can also take a braid. Hooks for such a donkey usually have a size of 10 and above (depending on what kind of bream you will be catching). With the help of a swivel, a nylon thread is mounted to the leash, on which the feeder and load will then be freely placed.

In order to prevent the load with the feeder from breaking the swivel assembly, you should make a stopper for the bead on a nylon thread, and only after that install the feeder with the load. And in order to improve their sliding, you must first string the feeder with a load onto a tube. A swivel is always mounted at the end of the tackle, through which it is connected to the main fishing line.

The stop mustache can be made from two pieces of wire 7 cm long. They are bent in the shape of the letter "p", and then they are pulled through the sinker from different sides.

Since such a donk is used for fishing in the current, here we need those baits that the current cannot wash away. Good go: meat of river shells, maggot and dung worm.

Fishing for bream in still water

In turn, the design of a donkey for fishing in still water differs from the previous one, first of all, in the absence of a stop bar and cargo. And hooks with leashes, here, can be attached directly to the feeder, without fear of their possible entanglement.

Donka for bream in still water has a main line 0.3-0.4 mm in size and leashes with a diameter of 0.2 mm. I would recommend that you make a removable tooling so that you can quickly replace it if necessary.

As a rule, the feeder is densely filled with bait so that when it hits the water, it does not wash out. The weight of the feeder itself can be calibrated depending on the distance of your casts.

Most often, the donka has a rod that does not exceed two meters in length. This allows you to cast where there are all sorts of obstacles, such as tree branches. The build, of course, is rigid, because the weight of the feeder is often quite significant. And of course, the rod should be equipped with high-quality guides to prevent abrasion of the main line.

Among other things, a bream donka should be equipped with a soft-running reel and a very hard friction clutch. Often, a bite signal in classic donks on bream is a 12-15 cm long tube with a bell, which, in turn, is attached to the main line between the guides. But I would recommend that you use a nod on the tip of the blank as a bite signal on your donk. This is a more sensitive option. Often, the signaling device is equipped with additional luminous sticks for night fishing.

The bream is a cautious, schooling and omnivorous fish. Except vegetable food with pleasure eats food of animal origin, not disdaining, at times, juvenile fish. In most cases, bream, especially large ones, find food at the bottom of the reservoir far from the shore. Bottom gear, given the feeding preferences of this fish, seems to be one of the best options for fishing gear for its prey.

Tackle for catching bream on the bottom

Donka with a feeder in its purpose and equipment, especially when using a rod with wire rings and a spinning reel, is very close to the feeder.

The main difference between these catchy tackles is in the principle of signaling a bite - the donka has a guard-signaling device, the feeder has a sensitive tip of the rod.

rod

The donkey rod does not have strict requirements. Usually this is a spinning fiberglass or duralumin rod with a length of 2.2 to 3.5 meters. The length depends on the desired casting distance of the bait. The rod test doesn't really matter. The main thing is that it can withstand the casting of a filled feeder and restrain the jerks of the fish, especially in the last stage of the fight. This ability is possessed by rods with a test of 30-60 g.

In the simplest options for bottom tackle, the rod and reel replace the reel. The tackle is thrown and pulled by the hands of the fishing line.

Coil

A donkey reel needs to be strong enough to withstand the constant jerky load when casting and playing big fish. Such requirements are met by inertial, inertial and multiplier coils:

inertial type "Nevskaya" require careful handling. With incorrect brake adjustment and untimely braking with a finger, “beards” often occur. Do not twist the line. Suitable for rods with small rings located on low legs;
inertialess easier and more versatile to use. Must be equipped with a rear friction brake. Helps to cast far. Twist the line. Require periodic "untwisting" gear, especially equipped with monofilament fishing line;
multiplier- perfect for long range fishing 50 meters. Do not twist the line. They transmit a careful bite to fingers well through the fishing line. Great for running donks. They are rarely used due to their cost.

The capacity of any reel on the donk must be at least 100 m of line.

fishing line

The choice of fishing line in each case depends on the personal preferences of the angler and the specific fishing conditions:

monophilic a line of 0.2-0.4 mm should be set if the casting distance does not exceed 40-50 meters. The fishing line is stretchable and at long distances you can not count on a clear cut. Well extinguishes jerks of fish. Possesses memory and is prone to deformation;
wickerwork with a diameter of 0.2-0.28 mm should be used for long casts - it sails less than the same for breaking, but thicker monofilament. The braid registers the bite well. Promotes a clear undercut. When playing on a braided line, the jerks of the fish should be extinguished by the rod. It does not have memory and can be used on bottom gear for several years.

An important factor in choosing the thickness of the fishing line is the speed of the current.

The stronger the current, the stronger the sail and the thicker the fishing line, the more likely it is that the tackle extended by the arc will not clearly transmit the bite and respond to hooking.

Donkey rigging

For bottom fishing rods, both ready-made and home-made equipment are used.

Feeder rigs have gained popularity due to their catchability and ease of manufacture. The main ones are:

parternoster;
asymmetric equipment (loop);
blind loop;
symmetrical equipment (loop).

Bottom equipment with the use of feeders and sinkers, which are most widely used:

with a sliding feeder (weight). Best suited for fishing in stagnant waters. You should not put more than one leash on such a tackle. Additional leashes lead to an increase in the number of hooks and overlaps;
with an end feeder (weight). It is best suited for fishing in the current, for long casts into deep holes. In order to avoid the loss of all the tackle and the trophy, in the case of a “dead” hook, a sinker (feeder) is attached to the main line with a thinner line. Usually two or three hooks with different baits are put on such tackle;
with anti-twist. Works well both in the course and in reservoirs with stagnant water.

Any curved PVC tube of a suitable diameter and neutral color can serve as an anti-twist. The purpose of this device is that the reel spins around the line when casting, and not with it.

The feeder on the bottom tackle performs a dual function - it fixes baited hooks in the place of fishing and holds the fish in place with bait. The following feeders are most often used in bottom fishing:

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective ones:

Cool activator. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates their appetite. It is a pity that Rosprirodnadzor wants to ban its sale.
More sensitive gear. Reviews and instructions for other types of gear you can find on the pages of my site.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading our other articles on the site.

The leash is knitted from monofilament or braided fishing line:

From braided fishing line 01,-0.2 mm.
From monofilament 0.2-0.25 mm.

It is necessary to have a set of leashes of different lengths. Short (20-40 cm) are used for good biting. In case of attenuation of the bite or its absence, it is more productive to use long ones (up to 1 m).

Hooks used for bream fishing according to the bait:

for bloodworm - No. 14-16;
for maggot - No. 10-14;
for barley and corn - No. 8-14;
for the worm - No. 6-10.

General requirements for hooks:

should be as sharp as possible - often the fish are caught on their own;
the size of the hooks can affect the size of the fish that will be caught. Enlarged hooks are able to cut off small fish from the bait;
you need to have ready-made leashes with hooks of different sizes, in case you have to switch to catching smaller fish.

Feed and bait

For bream fishing, both store-bought mixtures and home-made baits that have been proven over the years are used. In most cases, such bait contains peas, roasted sunflower seeds, corn, oatmeal, steamed fish feed. Of the animal components, chopped worms, bloodworms and maggots are added to complementary foods.

When preparing bait for fishing on the current, it is necessary to achieve such a viscosity that for a long time, gradually washing away, it attracts fish.
In stagnant water, the bait should fall out of the feeder from contact with the ground when casting.
In the place of fishing, there should always be a spot of bait, which will keep the flock of bream in one place, regardless of where the tackle is located - in the water or on the shore.
Clay or earth added to the bait will create an extra cloudy cloud that will attract fish. In addition, an inedible additive will not allow the bream to quickly get enough.
AT cold water(in early spring, autumn and winter) bream prefers bait with animal components.

nozzles

in early spring - bloodworm, maggot;
from May, the use of vegetable nozzles begins;
in summer - pearl barley, peas, maggots, bloodworms, worms, pasta, foam balls. Sandwiches work great, where the vegetable nozzle is fixed on the hook with a worm or maggot. A sandwich of a couple of bloodworms and maggots has proven itself well. As a nozzle, the meat of aquatic mollusks is used, which, together with the bloodworm, constitute the main natural food of the bream;
autumn - bloodworm, worm, maggot.

It is necessary to adhere to the "golden" rule - what is in complementary foods, then on the hook.

fishing technique

The first thing an angler should do in a familiar pond is to soak the bait, if it is not brought to the pond in finished form. The second action, while the bait ripens, is collecting tackle. In the case when the equipment allows, only the feeder is hung on the main line. Then proceed in the following order:

loosely fill the feeder with bait and throw it into the place of fishing;
after waiting 1-2 minutes, they pull sharply, freeing the feeder from the feed. Pull out tackle;
reception is repeated 5-10 times. It is crucial to hit exactly in one place. If the bait is scattered over a vast area, then the fish will scatter in different directions;
further casts, proceeding directly to fishing, are performed in the same place. The feeder is stuffed more tightly than when starting feeding;
if fishing takes place on a reservoir with a current, all casts are made taking into account it and upstream;
it is not worth rushing to hook a bream immediately after the signal from the gatehouse. You need to take a short break and give the fish the opportunity to catch on their own. A sharp cut, especially if a braid is used, can cut off the weak lips of a bream;
when playing, let the bream take a breath of air. After that, the fish will lie on its side and practically cease to resist;
if active, sea fishing is planned, then more than 30-60 minutes in one place without bites is not worth staying.

In cases where the angler is not familiar with the reservoir, you must first tap the bottom landscape with a spinning step in search of holes, brows and other places where fish can stand.

The signaling device on the donk is usually a bell. If you are fishing with a rod, then the bell with a clip is attached to the tip of the rod. In cases where a rod is dispensed with, a bell or other signaling device is attached to a fishing line at a reel stuck into the shore.

Electronic devices are also used as a bite signaling device.

Donka, the tackle is universal and budgetary. Allows you to successfully fish in the course and in stagnant water, with a sinker and a feeder. The undoubted advantage of a bottom fishing rod is the ability to catch bream in windy and cloudy weather, when it leaves the shore and hides in holes where float rod you won't get it.