The best bait for bream in May. When does the bream peck in the spring? What does the bream bite on? Secrets of catching bream in April with a float rod on the video channel

Bream fishing in May

The end of a long winter always brings joy to all amateur anglers, because in the spring-summer period the season for catching many types of fish opens. Separately, it is possible to note the catching of bream in May. Before spawning, this fish gathers in flocks, and its activity in relation to foraging increases greatly.

May fishing for bream and its features.

Usually, the ice comes off the surface of the reservoirs by the end of April, if the spring is not long. In May, the water becomes clearer, its temperature rises, which makes the fish more active in search of food.
Flocks of bream during spawning gather closer to the shore of reservoirs, where the water is warmer and there is more food. Bream is a shy fish and it is important for fishermen to know that even a slight noise near a reservoir can frighten away a flock and good fishing will no longer work. It is in May that the bream bite especially well.

Favorite habitats of bream in late spring.

Before spawning begins, breams feed on various insect larvae, worms, which are very numerous in bays with an abundance of aquatic plants. River mouths are a favorite habitat for this fish, if it spawns in the river. If the river is large, then the bream often gathers near dams or near pits. The spawning of this fish can continue for a long period of time: at first, medium-sized specimens spawn, and then large individuals. The weather has a great influence on the duration of the spawning season.

Tackle for catching bream in May.

During this period, bream is caught on fishing rods equipped with floats, or on bottom tackle - a feeder. Ideal for catching this fish are rods 6-7 meters long, equipped with reels with fishing line, the diameter of which does not exceed 0.27 millimeters. The leash is made from thinner fishing line (0.2 mm). Often, fishermen make another leash located above the sinker to track the depth of the fish. Hooks should be chosen thin and not very large so that you can conveniently plant a delicate bait.

Bottom gear is used when the bream moves away from the shore to deeper places, preparing for spawning. On the bottom tackle, fishermen often catch large trophy bream. The feeder is good because it is very convenient for them to fish when the wave is big and the wind is strong. The length of the rod should be 3 meters, the diameter of the fishing line is 0.25 millimeters, and the leash should be at least 20-50 centimeters long with a fishing line diameter of 0.16 millimeters.

Feeding bream.

You can easily make your own or buy in the store boxes for bait in the form of a pyramid or rectangle made of metal mesh. The grid cells can be made small if bloodworms or maggots are included in the bait.

When catching bream in May in a certain permanent place, complementary foods are of great importance. You can buy ready-made bait in the store and then mix it with porridge made from oatmeal, pearl barley or peas. If you are fishing for a worm, then add finely chopped worms to the bait. For bonding, clay mixed with sand can be used. You can also add ground crackers to the mixture bought at the store, corn grits. It is good if when the bait is immersed in water, turbidity forms. This can be achieved by adding a few tablespoons of cocoa to the bream feed mixture. Flocks of breams gather well for bait with a sweetish aroma, therefore, you can use all sorts of fruit essences for supplements.

Places for catching bream in May.

If you intend to fish for bream in May, then choose those parts of the rivers where the bottom is rocky or covered with clay. As for the depth of fishing, it can exceed 1 meter. The shell-covered shallows are often full of fish, and your catch will always be good.

The bream likes to feed near snags or stones, and large bream become the prey of fishermen when fishing on sandbanks, where the depth does not exceed half a meter.

About nozzles for May fishing for bream.

In May, the bream bites well if bloodworms, maggots or small earthworms are used as bait. Well suited for this purpose and caddis. You can put two small worms on one hook at once. At the end of May, when the water becomes warmer, the bream also takes well such baits as boiled barley, peas, boiled or canned corn, as well as bait from dough flavored with anise drops or cinnamon extract.

Now, knowing about the features of bream fishing in May, you will not be left without a luxurious catch.

> Secrets of catching bream in May

On many rivers, lakes, reservoirs of the central district of Russia, fish spawning begins in the month of May, so fishing with any gear is prohibited. On the rivers in some places it is allowed to use one rod with one hook, but sometimes such fishing is difficult due to strong spring currents. As the water level in the reservoirs decreases, the conditions for catching fish change. The bream at this time can be both near the shore and away from it.

The spawning period and the activity of the bream largely depend on how high the turbidity of the water is, what is the level and what is the temperature of the water in the reservoir. The bream can start spawning in flooded spills when coastal bushes are still flooded with water, but this only happens if this water has warmed up sufficiently. These properties distinguish bream from many other fish species, for example, from roach. She begins her spawning only when the river enters its usual channel. Bream in the middle zone of the country starts spawning in May and, as a rule, it takes place in three stages. Medium-sized individuals (recruiters) are the very first to start spawning. After them, the largest breams start throwing. Small individuals (spikelets) spawn later than all.

The bite of bream in May is not uniform. The peak of its activity falls on the pre-spawning period, sometimes males covered with a large rash can be caught. The bite continues only in those places where the current of water is not too strong. After spawning, the fish begins to recover a little, but actively feeds towards the end of the month or at the beginning of June. It depends on how fast the flood passes. In some rivers, due to snowy winters, the water level drops for a long time; this situation often develops on the Oka and its tributaries. In these areas, heavy rainfall is also frequent, so the water level is high until mid-June. After the rivers return to the mainstream, fish biting becomes more predictable. The bream starts cyclic feeding. It comes out of secluded places mainly to the same sections of water bodies in the morning or evening hours, but more often it is noticed at night. The bream likes to walk in flocks, by this period the flocks begin to increase. Since flocks are constantly changing their location due to the instability of the weather, the result of fishing directly depends on the search for these flocks.

During periods of high water, breams try to avoid strong currents. It is for this reason that on medium and large rivers they go into quiet backwaters, because there is neither turbidity nor garbage, the water can settle. Sometimes small flocks or solitary fish are close to flat shores, but at the same time they try to cling to small coastal depressions and gaps. On some rivers, 30 or 40 centimeters from the shore, you can catch a good bream. The depth in such places does not reach even 1 meter. The location of the bream in shallow water directly depends on the illumination. When the water becomes lighter and cleaner, the main habitats for bream are considered to be rip current zones. The bream loves to be in places where the water curls, and organisms carried here accumulate at the bottom, which are washed out from under stones, snags, algae and coastal soil. The bream easily finds these places in reservoirs.

The smaller the river, the faster it descends into the channel after the flood. On medium rivers, such as the Nerl, Osetr, Pakhra, good fishing conditions begin already in mid-May. It is necessary to find sections of the rivers in which the water is warmer, lighter: near algae, near the coast, that is, where there is a good concentration of live food. In the same places, at the end of the month, the first larvae of bell mosquitoes emerge. That is why bloodworms are not of great interest as bait for bream. If the water begins to subside, then the most productive will be those places in which the fish spawn. In May, the bream bites only at night near the shore. Such fishing requires the greatest care from the angler.

Bream can be caught in the wiring. Usually, wiring is understood as the slow movement of the nozzle near the bottom. With a quick posting, you can only catch a small bream. As a rule, on medium-sized rivers for fishing bream, float fishing rods are used, the rod length of which is 5 or 7 meters, with an inertialess reel, a leash of 0.2 mm and a fishing line with a diameter of 0.25 mm. For fishing in troubled waters at the beginning of the month, you can choose a fishing line up to 0.35 millimeters, because the bream is hungry at this time and takes the bait with great force. A thick line will protect your rigs from breakage. If hooks are rare in the places to be checked, then when fishing you can do without a leash, then you need to tie a knot on the line a little higher than the hook, so that, in extreme cases, the line breaks at the anchor point. Otherwise, when catching large bream, you can be left without gear. It is also necessary to use sinkers, better than branded production. You need to put one pellet weighing 1.5 or 2 grams.

For successful fishing, the choice of the length of the leash is very important. Short when holding allows you to quickly and low raise the bait. A long leash allows you to lift the bait high, but slowly. If the fish does not show any active actions, the second length option is more preferable. When choosing the length of the rod, you need to know that the longer it is, the harder it must be, otherwise the fish may break the line. It is very difficult to control the equipment with a soft rod. Remember one rule: the softer the rod, the lighter the rig should be. On spring fishing very often they take several fishing rods with them. In general, some amateur anglers have up to thirty rods at home, each of which works in its own way.

In central Russia, fishermen have to use rods up to 9 or 11 meters long when fishing for bream, because during this period the bream likes to be on the border between a weak and a strong current. These boundaries are usually found in areas of sharp change in depth. Here, silty alluviums are formed, which this fish loves. For bream, areas with “quiet” water are well suited. As a rule, they are located in areas of last year's grass and are 15 meters away from the shore. In May, on rivers similar to the Oka, bream can be caught by slowly dragging the bait along the ground or slowly moving it near the bottom. To do this, you need to choose a place with a clean bottom. Fishing will be very successful if, during fishing, the wind blows against the current of the river, thereby slowing down the movement of the float.

As you know, large fish can be very slow, it does not always keep up with a fast-moving nozzle, therefore, if you want to catch a large specimen, you need to fish with a plumb line at this time. In this case, you will need a 5-meter rod with a hard whip. 50 centimeters from the top of the rod on the fishing line, you need to install two lead shot-locks. Between them is attached a sinker-plumb. The size of the hooks must match the nozzle. The mass of "olives" and "plumb lines" depends on the speed of the current, so you should always have a set of sinkers with you. To achieve positive results, you need to correctly load the gear. A very important condition is the angle between the shore and the fishing line. After the "olive" lies on the bottom, the angle between the shore line and the fishing line should be 45 °. The equipment is thrown into a fast current and they wait until it is carried to an area of ​​\u200b\u200ba less strong one. Here the sinker sinks to the bottom, and the leash begins to walk from side to side. During such fishing, the rod is usually not held in hand, but fixed on the shore.

The end of a long winter always brings joy to all amateur anglers, because in the spring-summer period the season for catching many types of fish opens. Separately, it is possible to note the catching of bream in May. Before spawning, this fish gathers in flocks, and its activity in relation to foraging increases greatly.
May fishing for bream and its features. Usually, the ice comes off the surface of the reservoirs by the end of April, if the spring is not long. In May, the water becomes clearer, its temperature rises, which makes the fish more active in search of food.
Flocks of bream during spawning gather closer to the shore of reservoirs, where the water is warmer and there is more food. Bream is a shy fish and it is important for fishermen to know that even a slight noise near a reservoir can frighten away a flock and good fishing will no longer work. It is in May that the bream bite especially well.
Favorite habitats of bream in late spring.
Before spawning begins, breams feed on various insect larvae, worms, which are very numerous in bays with an abundance of aquatic plants. River mouths are a favorite habitat for this fish, if it spawns in the river. If the river is large, then the bream often gathers near dams or near pits. The spawning of this fish can continue for a long period of time: at first, medium-sized specimens spawn, and then large individuals. The weather has a great influence on the duration of the spawning season.
Tackle for catching bream in May.
During this period, bream is caught on fishing rods equipped with floats, or on bottom tackle - a feeder. Ideal for catching this fish are rods 6-7 meters long, equipped with reels with fishing line, the diameter of which does not exceed 0.27 millimeters. The leash is made from thinner fishing line (0.2 mm). Often, fishermen make another leash located above the sinker to track the depth of the fish. Hooks should be chosen thin and not very large so that you can conveniently plant a delicate bait.
Bottom gear is used when the bream moves away from the shore to deeper places, preparing for spawning. On the bottom tackle, fishermen often catch large trophy bream. The feeder is good because it is very convenient for them to fish when the wave is big and the wind is strong. The length of the rod should be 3 meters, the diameter of the fishing line is 0.25 millimeters, and the leash should be at least 20-50 centimeters long with a fishing line diameter of 0.16 millimeters.
Feeding bream.
You can easily make your own or buy in the store boxes for bait in the form of a pyramid or rectangle made of metal mesh. The grid cells can be made small if bloodworms or maggots are included in the bait.
When catching bream in May in a certain permanent place, complementary foods are of great importance. You can buy ready-made bait in the store and then mix it with porridge made from oatmeal, pearl barley or peas. If you are fishing for a worm, then add finely chopped worms to the bait. For bonding, clay mixed with sand can be used. You can also add ground crackers, corn grits to the mixture bought at the store. It is good if when the bait is immersed in water, turbidity forms. This can be achieved by adding a few tablespoons of cocoa to the bream feed mixture. Flocks of breams gather well for bait with a sweetish aroma, therefore, you can use all sorts of fruit essences for supplements.
Places for catching bream in May.
If you intend to fish for bream in May, then choose those parts of the rivers where the bottom is rocky or covered with clay. As for the depth of fishing, it can exceed 1 meter. The shell-covered shallows are often full of fish, and your catch will always be good.
The bream likes to feed near snags or stones, and large bream become the prey of fishermen when fishing on sandbanks, where the depth does not exceed half a meter.
About nozzles for May fishing for bream.
In May, the bream bites well if bloodworms, maggots or small earthworms are used as bait. Well suited for this purpose and caddis. You can put two small worms on one hook at once. At the end of May, when the water becomes warmer, the bream also takes well such baits as boiled barley, peas, boiled or canned corn, as well as bait from dough flavored with anise drops or cinnamon extract.
Now, knowing about the features of bream fishing in May, you will not be left without a luxurious catch.

Fishing for bream in the spring is the most suitable time of the year for many anglers. Before spawning, fish gather in flocks and feed heavily, which gives the angler an additional advantage. However, it is not always possible to return from fishing with a catch.

Spring bream fishing has its own characteristics that you should be aware of, as well as apply this knowledge in practice. How to catch bream with the greatest probability is the following guide.

Bream spawning time and the beginning of spring fishing

Active bream fishing starts in May

You can go for spring bream immediately after the ice melts from the surface of rivers and reservoirs. This usually happens in late March or early April.

Fish biting improves as the water becomes clearer and its temperature increases.

The closer to the spawning period, the larger the flocks become, the closer the breams come to the shore. It is important for the angler not to frighten away the fish with an awkward movement and the slightest rustle.

The most stable bream begins to peck in the month of May.

Until the moment of spawning, the bream prefers to feed on insect larvae and worms at the edge of aquatic vegetation in shallow bays. If spawning occurs in rivers that flow into a reservoir, then it is necessary to catch bream at the mouths of these rivers. Here, the fish actively feed and, as soon as the water warms up, they will go upstream to spawning grounds.

In large rivers, before spawning, fish accumulate near dams, near pits, near oxbow lakes, in which spawning takes place. In some rivers bream long time remains in places of permanent location, going to spawning grounds at the last moment. The spawning period, even in one river or reservoir, can stretch for almost a month, starting in May. It all depends on weather conditions at this time.

The main ways of catching and tackle for catching spring bream

Spring bream is caught in two ways:

• float fishing rod;
• bottom tackle (feeder).

Since the bream comes close enough to the shore, this fact must be taken into account when equipping the fishing rod.

When fishing with a float rod, long rods will win, among which the plug is the favorite. Given the high cost of such tackle, you can opt for a 6-7-meter telescopic rod with throughput rings. But it should be light and of high quality.

• The main fishing line with a diameter of 0.25-0.27 mm is wound on an inertialess reel with a size of 2000-3000, the thickness of the leash should be 0.18-0.2 mm. Sometimes a second leash is mounted above the sinker. Then you can track in which horizon the fish feeds.
• The hook is not very large, made of thin wire, so that bloodworms and worms are easily planted.
• A drop-shaped float is selected with a carrying capacity of 1-3 g.
• Catching bream in the spring on a feeder is preferable in late April and early May, when the bream walks a little fat near the shore and goes to spawning grounds. The feeder allows you to catch a trophy specimen at this time.
• The fishing distance is 20-30 m from the shore. It is especially convenient to use a bottom fishing rod in strong winds or large waves.
• The rod must be at least 3 m long, reel size 2000-3000 with main line 0.25 mm.
• Leash 0.14-0.16 mm, length 20-50 cm. The feeder is selected depending on the strength of the current and the composition of the bait mixture.

For fishing on the river, it is necessary to use triangular or rectangular models of metal mesh feeders. In stagnant ponds, closed feeders should be used if bloodworms or maggots are present in the bait.

Catching carp on a feeder, which also sometimes comes across when catching bream on a feeder - how to increase the chances of catching wild carp.

Bait for bream in spring

In spring, when stationary fishing for bream, baiting is necessary. This fish loves sweet bait formulations, so sugary ingredients should be present in the mixture. Combining canned corn with vanilla, cinnamon, coriander or fennel flavors gives excellent results.

By making the bait light, you can scare away the bream, and only large fish will peck.

An effective way to prepare bait is to mix store-bought formulations with cereals. So, for 1 kg of Unikorm bait, you need to add 300 grams of millet, hercules, peas and pearl barley. And if fishing will take place using worms, then 300 g of chopped worms are added to the bait mixture. Sand and clay are used as binders.

The best results when fishing for bream are baits Sensas, Trapper and Dunaev.

IN purchased mixture good to add:

• bloodworm;
• breadcrumbs;
• powdered milk;
• barley;
• Hercules.

In order to form a cloud of turbidity when immersing the bait, add 2-3 tablespoons of cocoa. To add sweetness to the bait composition, it is better to use fruit essences, for example, pear or banana.

The role of baking powder is performed by ordinary river sand.

It is important not to miss a single moment when preparing for fishing. Carefully prepare tackle, find a good place for fishing, feed the bream with a delicious mixture, choose the right bait. And then the patience, perseverance and scrupulousness of the angler will be rewarded with worthy trophies of spring bream.