home » Decor » Mittens with owl knitting needles: a detailed description with diagrams and videos. Knitted mittens "Owls Mittens with a pattern of an owl crochet pattern

Mittens with owl knitting needles: a detailed description with diagrams and videos. Knitted mittens "Owls Mittens with a pattern of an owl crochet pattern

Needlewomen have an undeniable plus - they can at any time independently make the missing accessory for themselves and their families. For example, mittens with owls are a hit of this season. If you still do not have such a cute model, then it's time to pick up the knitting needles.

Novice needlewomen who have not achieved some extraordinary skill can cope with the manufacture of this little thing.

Many novice needlewomen are afraid to take on the manufacture of products with drawings. But do not worry, it is only at first glance that the pattern is difficult to knit. In fact, the scheme is simple, and a novice craftswoman can handle it. In addition, the manufacture of mittens with owls takes a minimum of time. And believe me, it will bring you only positive emotions.

Knitting density

First of all, you need to knit a small sample measuring 10 x 10 or 10 x 5 cm. This will take a little time, but you will be sure that the size will fit exactly and you will not have to bandage the product. After all, mittens are an accessory that must fit exactly in size. It is only in a sweater that such an error is not so obvious. Therefore, mittens with an owl must exactly match the size of the fashionista's hand.

Before proceeding, you need to calculate from the sample how many loops there will be in 1 cm. If there are 19 loops in 10 cm of the sample, then there are 1.9 of them in 1 cm.

Yarn and necessary tools

Particular attention should be paid to the choice of yarn. It is better to give preference to threads, the composition of which will contain a large percentage of natural wool. But it should be remembered that owl mittens should be comfortable and warm for women's hands. After all, if you do not take care of your hands, the skin on them can grow old ahead of time.

Would you like to have such a chic little thing in your wardrobe? Then rather take yarn and knitting needles in your hands! On average, to make owl mittens with knitting needles, you will need 150 g of yarn. Prepare also the stocking needles of the required size, additional for yarn, beads for the eyes.

Right mitten

We determine the volume of the wrist, calculate the required number of loops using the sample and type them on the knitting needles. Let's say you need to dial 33 loops on the knitting needles. Since mittens are knitted in the round, the last loop must be used to close the work in a circle. Be sure to mark the beginning of a new row with a marker. Now you can start knitting elastic bands 1 x 1, or 2 x 2. Experienced needlewomen advise knitting an elastic band on knitting needles, which is 1 size smaller than those with which the main fabric of the product will be knitted. For example, an elastic band at No. 3.5 mm, and a mitten pattern at No. 4.0 mm.

It is recommended to knit 10 rows with an elastic band. If you want it to be higher, knit the pattern to the desired size. Now you need to start working with larger knitting needles. You can also increase the length of the elastic, so the mittens will be a little higher. To do this, you just need to increase the number of rows knitted with a 1 x 1 pattern. Having reached the required length, switch to knitting with knitting needles of a larger number. At the same time, every 4 loops it is necessary to make an increase: knit two from one loop. Thus, there should be 40 loops on the knitting needles.

Execution of the pattern

We knit 6 rows of facial loops.

In the 19th row, you can begin to form a pattern. The pattern is best knitted on the third and fourth knitting needles. The remaining loops must be knitted with front stitch.

The pattern itself is knitted clearly according to the scheme. The needlewomen recommend separating the pattern with 1-2 purl loops from the front surface.

The scheme is quite simple. The main thing is to carefully follow the sequence of loops. Particular attention should be paid to the 2nd, 10th and 14th rows according to this scheme.

Don't forget to leave a hole for your thumb on the first or second needle. All loops must be removed on a thread or pin. When knitting the next row, these loops must be dialed again. Thus, we get a hole for the thumb.

2nd row of the pattern: remove 2 loops on the auxiliary loop, leave it to work. We knit 4 facial loops. We remove the next 2 loops on the auxiliary loop and leave them before work. We knit facial.

10 and 14 rows knit in the same way.

There are other patterns of the "owl" pattern. They are a little thicker, and the body is knitted not with the front stitch, but with a “rice” pattern. But the principle of knitting remains the same.

Decrease loops

If the main fabric, after knitting the pattern, has reached the level of the little finger, you can start decreasing the loops already from the 39th row. If the height of the product is unsatisfactory, you can knit the required number of rows with facial loops.

The reduction should be even. To do this, it is necessary to knit the first 2 loops together on the first knitting needle, make sure that the slope is made to the right, on the second knitting needle we decrease the last 2 loops with a slope to the left. We knit the third and fourth knitting needles in the same way. Decreases are made in each row. They form a clear line of product width. We continue to make decreases until the total number of loops is 8. A working thread is pulled through them. You can use a hook or a needle. We hide the thread and fix it from the wrong side.

Finishing the finger

We return to the formed hole, we knit the thumb. To do this, transfer all the loops from the pin to the knitting needle. From the opposite set-on edge, we collect 6 loops and 1 on both sides. In a circle we knit 12 rows. After the loop, we distribute it on 2 knitting needles and begin to make decreases. On each knitting needle we decrease one loop in the same way as on the mitten: from the beginning of the row with a slope to the right, at the end - to the left. As soon as 8 loops remain on the knitting needles, they must be pulled off and the thread hidden on the wrong side.

The mitten is ready.

Left mitten

The description is very simple. By the same principle, the left mitten should be performed. At the same time, make sure that the thumb hole is symmetrical.

Product decor

To complete the product, you should sew on the eyes of the owl. To do this, you can use beads, rhinestones, buttons on the leg, faceted beads. Each needlewoman chooses a more acceptable option, because everyone has different tastes. You can also cut out circles of felt of the required diameter, and sew beads inside. In a word, you can decorate mittens with an owl for every taste. The main thing is to include your imagination in the work.

Conclusion

The description of mittens with owls will help everyone quickly and easily cope with the task. Difficulty can arise when located in the center of the pattern if a larger product is made. If you want to enlarge this pattern for making a hat, scarf or sweater, you need to know that it is based on a harness pattern. Needlewomen recommend that you first enlarge the pattern, draw its diagram and knit a sample. If everything suits you, you can safely use the prepared scheme. If not, it is enough to correct the scheme, figuring out how many rows and loops you need to retreat from all sides.

Mittens with a pattern "owl" knitting needles (master class)

The owl pattern is very pretty. Many people think that knitting is difficult. I also thought so at first)) It turned out that everything is easy and simple, if at least in principle you can imagine how the simplest tourniquet is knitted on the needles.

I present to your attention children's mittens with an owl pattern. Adults can also be knitted according to their pattern!

Materials and tools:

Yarn Alize Baby Wool - 1 skein;
stocking knitting needles No. 1.5;
an additional knitting needle (or a special knitting needle for removing loops - very convenient!);
yarn needle;
four beads;
threads and a needle for sewing on beads.

Mittens are knitted in two threads.

So, we collect 32 loops, distribute them into 4 knitting needles (8 on each).

1 - 10 rows: gum 1 persons. x 1 out.

11th row: persons.
12 row: persons .; add from broaches of 2 persons. on every spoke
13 - 18 rows: persons.
19 row: we begin to knit the "owl" on 12 loops of the third and fourth knitting needles. The first knitting needle - faces.; the second knitting needle - persons .; third knitting needle - 4 persons., 6 out.; fourth knitting needle - 6 out., 4 persons.
20 row: the same as the 19th.

21 row: first knitting needle - faces .; the second knitting needle - 2 persons., remove 6 loops for the hole of the thumb on a pin, dial 6 additional loops, 2 persons; third knitting needle - 4 persons., 2 out., 4 persons.; fourth knitting needle - 4 persons., 2 out., 4 persons.

22, 23 rows: the first knitting needle - persons .; the second knitting needle - persons .; third knitting needle - 4 persons., 2 out., 4 persons.; fourth knitting needle - 4 persons., 2 out., 4 persons.
24 row: the first knitting needle - faces .; the second knitting needle - persons .; the third knitting needle - 4 persons., 2 out., Remove 2 loops for additional. knitting needle at work, knit the next two loops of faces., then loops on additional. spoke - persons .; the fourth knitting needle - remove two loops for additional. knitting needle before work, knit the next two faces., then loops on additional. knitting needle - persons., 2 out., 4 persons.
25 - 31 rows: the first knitting needle - persons., the second knitting needle - persons., the third knitting needle - 4 persons., 2 out., 4 persons.; fourth knitting needle - 4 persons., 2 out., 4 persons.
32nd row: same as 24th
33 - 35 rows: the first knitting needle - faces .; the second knitting needle - persons .; third knitting needle - 4 persons., 2 out., 4 persons.; fourth knitting needle - 4 persons., 2 out., 4 persons.
36th row: the same as the 24th and 32nd.
37 row: first knitting needle - faces .; the second knitting needle - persons .; third knitting needle - 4 persons., 2 out., 2 persons., 2 out.; fourth knitting needle - 2 out., 2 persons., 2 out., 4 persons.
38 - 41 rows: the first knitting needle - faces .; the second knitting needle - persons .; third knitting needle - 4 persons., 6 out.; fourth knitting needle - 6 out., 4 persons.
39 row: we begin to decrease. First needle - knit the first 2 loops together faces. behind the back wall; the second knitting needle - knit the last 2 loops of faces. behind the front wall; third needle - knit the first 2 loops together faces. behind the back wall; fourth needle - knit the last 2 loops of faces. behind the front wall. Knit the remaining loops according to the pattern (faces and out.)

When only 8 loops remain on the knitting needles, we tighten them with a needle

For the thumb, we transfer the 6 loops taken on the pin to the knitting needle, we collect 2 + 6 + 2 loops from the edges on three knitting needles ...

And knit 12 rows in a circle.

Then we transfer all the loops to two knitting needles and begin to decrease: on each knitting needle, we knit the first 2 loops together behind the back wall, the last 2 - behind the front.

When only 8 loops remain on the knitting needles, we tighten them with a needle. One mitten is ready!

We knit the second mitten in the same way - only we leave the hole for the thumb not on the second knitting needle, but on the first one.

Sew beady eyes on the "owls" - and let the baby wear mittens with pleasure!

If you have not yet acquired such a hit of this season as owl mittens, then the time has come to knit this cute little thing.

Unusually beautiful mittens with owls

The manufacture of this model does not require any professionalism or any extraordinary skill from you.

The scheme is quite simple and even a novice craftswoman will master it, and the time for performing this unearthly miracle will fly by unnoticed and will bring only positive emotions.

Desired Density

Pre-make a tiny sample that does not take much time and effort, and you will save yourself and your finished work from annoying unplanned bandaging in the event that it turns out that the work and efforts were in vain. After all, mittens are not a sweater or jumper, for which the difference in size is not so obvious. Everything here should fit to the centimeter. So, in ten centimeters of the finished sample, nineteen stitch loops should fit.

materials

Bright blue owl pattern mittens

Buy only yarn for mittens that has a large percentage of natural wool in its composition. Do not lose sight of the fact that the main purpose of mittens is, in spite of everything, to create comfort and warmth for delicate female hands. After all, not a single woman wanted the skin on her hands to grow old ahead of time. In order for your wardrobe to be replenished with such a chic little thing, you only need one hundred and fifty grams of yarn.

Left mitten

Cast on approximately 32 stitches. Since this model is based on knitting in circular rows, when you close all the loops after the cast-on edge into a ring, be sure to make a mark with a special marker at the very beginning. When the ring is closed, start knitting with a 2 by 2 elastic pattern with knitting needles, the number of which will be one size smaller than those with which you will make the main fabric of the thing.

With an elastic band, twenty-four rows must be completed. If you want the mittens to keep warm even better, you can, of course, increase the elastic band to the required size. After that, move on to knitting with knitting needles of a larger number. This is done as follows: * 6 persons, make one person out of two. *. repeat from asterisk to asterisk for three more p. Thus, you will get twenty-eight loops. After: two rows of faces only. Then: 20 persons. loops, 2 purl, 6 persons. loops. Now proceed to the wedge for the thumb.

Detailed description

The loops on which you continue the execution of the thumb must be removed with a pin.

We continue:

13: 16 persons., remove ten points for extra. sp., 4 out.p., 8 persons.p., 4 out.p..

14: 16 persons., 4 out., 8 sheets, 4 out.

The last row must be knitted with knitting needles without cuts and additions and without crossing with a straight cloth seven more times.

Continue knitting with owls:

22: 16 persons., 4 out., 2 remove on an auxiliary knitting needle at work, 2 persons. and remove with auxiliary facial. Again, remove two loops on a pin, but already before work, two front and two from a pin, four purl.

23: 16 persons., 4 purl, 8 facial, 4 purl. This sequence must be repeated three times in a row.

27: 16 slp, 4 purl, remove two at work, 2 persons. loops with additional purl, again two on additional sp., but this time a thread before work, 2 purl, loops with additional, 4 purl.

28: 16 l.p., 4 out.p., 2 persons., 4 out., 2 persons., 4 out.p.

29: 16 lp, 4 i.p., 2 together l., one increase in purl, 2 out., 1 add, 1 remove, 1 person. and stretch through this loop the one that was removed in front of it, four out.p.

30: 16 l.p. and 16 i.p.

31: 17 stitches, 14 stitches, 1 stitch

32: 18 y.o. pet., 12 of, 2 persons.

33: 19 l .. 10 out., 1 l.p.

All. The Owl drawing is ready. After you reach, practically, the tip of the little finger, proceed to decrease the top of the mitten. To do this, constantly applying them to your hand, make reductions. In the first row, after all the cuts, you will get twenty-eight stitches. And so in each row, constantly decrease four loops and in this way reach the moment until only the last four loops remain in the work. Now cast off all remaining sts together on the last row and pull yarn through the remaining st. Break the thread and hide it on the back of the product.

Finishing the finger

It remains to finish the thumb. For him, dial again those loops that you previously set aside on a pin. In the first row, dial an additional four loops. Decrease two stitches on the next row. And you should get twelve sts. We knit the next nine rows with a straight cloth. Then we move on to cuts. The whole row to the end you need to knit two together, and at the end you get three. Close them all at once. Break the thread and hide it on the inside of the mitten.

The left mitten with an owl is ready. Do the same for the right mitten. Just note that the thumb must be performed symmetrically.

Sew beads or large rhinestones in place of the owl's eye.

We hope that the work on the pattern did not raise any questions, and the implementation of the scheme was simple and fun.

I don’t know who first came up with decorating mittens with an owl, but both adult women and young girls love and wear knitted mittens with owls. Children's mittens are also often decorated with owls - they can be on the handles of both a boy and a girl. There are not only mittens decorated with such a pattern, but also absolutely stunning mittens in the form of an owl.

Women who know how to knit have an undeniable advantage - to make any product with their own hands, not only for themselves, but for the whole family. We suggest not dwelling on our achievements, but trying to knit the hit of the season - mittens with an owl's muzzle. If you haven't had such a cute accessory yet, then it's time to pick up your favorite tool again to create another masterpiece. We assure you that even a novice craftswoman without much experience in needlework can cope with such a little thing.

So, here is a list of what you need to make a warm winter product:

Thick yarn.
Knitting needles (knitting rods) - it is better to take numbers 4 and 5.

Important! The density of our knitting in mittens with an owl pattern will be as follows: 18 persons. loops, smooth surface - knitting needles No. 5-10 cm. The consumption of material for two mittens is on average 180-200 grams of yarn. The size of the model is for the hand of an adult.

Elastic band on the cuff of the owl mittens

An elastic band of mittens with an owl pattern is knitted extremely simply in a matter of minutes:

We collect 34 loops, the last of which is needed in order to close the knitting.
We knit the cuff with 3 loops: 2 persons. (cross with a left slope in odd columns) and 1 out.
2 throws, crossed to the right side - skip a stitch on the left knitting needle. The second loop is performed front.
2 throws, crossed to the left side - skip a stitch on the left knitting tool. Right - inserted into the second loop from the back of the left loop, and then fix it with the front. After that, both loops are simply removed from the left knitting needle. On the first - we scored 18 loops, and on the second - 15.
We knit again 18 identical columns. The height of our cuff is 9 cm.

After finishing work with an elastic band, we reset the numbering, starting again from the first row.

Upper half of the mitten

We begin to knit the upper half of our product with a finger:

We perform 2 decreases in the first column: we knit the first 2 stitches with facial ones, then according to the presented sample.
We connect the last 2 loops with the front one with an inclination to the left side.
We perform work on the second knitting rod with facial loops. As a result, we got the following picture: the first knitting needle contains 16 sketches, and the second - 15.
The third column is performed according to the scheme, working with a loop from the first rod. Yarn over, then 2 sts on the second needle, yarn over again, work the next 13 stitches.
We knit the seventh column according to the pattern from the first rod. We throw an air yarn over, and then we knit 4 loops of the second rod in the front way, we make the remaining 13 loops according to the principle of the previous paragraph.
The eleventh row is modeled from the first rod, only with 6 facial loops.

Base

If you have a diagram in front of your eyes, then there is nothing difficult in continuing to work:

We make 2 decreases in the first column.
We begin to knit the third row. We perform an increase for the finger.
We knit 7 columns on the first knitting needle.
Yarn over on the second knitting needle, then knit 4. stitch, yarn over again and knit 13. Our warm finger is gradually emerging.
The tenth column is performed according to the same pattern.
In the eleventh row, we continue to form paws for our owl.

finger

The finger must be knitted carefully so that in the end the hand is comfortable and warm. For this:

In column 11 we create a finger with the second knitting needle. We do the work with short knitting needles under No. 4. We collect 6 loops on the first rod, we knit 4 loops from the second rod and the same from the third. These actions formed the first row for the finger.
We knit the second column according to the principle of paragraph 1 of this block.
3 row: we make a broach, 2 facial, securing all 4 stitches.
We knit loops with the second and third knitting needles.

We add 4 stitches to each knitting needle - 12 pieces.

We knit 10 more identical columns in a similar way.
14 column: we make 2 extreme loops facial.
We carry out the 15th row according to the principle from 7 points, 2 stitches should remain on the knitting needle.
Now you can cut the thread, while leaving a tail on which it will be convenient to collect hooks to finish knitting.
We pass the tip from the finger into the needle, then we collect all the loops, tightly tighten and bring it to the wrong side.
Warm finger is ready.

Now you can make cute owl mittens. An owl is only at first glance difficult to perform, but in fact everything is simpler than simple. As you can see, this work does not require a lot of material, professional skills and a lot of time. As an ornament for the eyes of the animal, you can use various beads, beads, rhinestones and much more.

Knitting an owl pattern is very simple and even beginner craftswomen can cope with it. The whole secret of the pattern is in crossing the loops, with the help of an additional knitting needle, as when knitting a braid. You can decorate with this pattern both children's and women's clothes.

An owl pattern with knitting needles is perfect for knitting hats, mittens, mittens and even socks and bracelets. You can diversify the pattern with beads, buttons and contrasting colors. With a little imagination, you can create a whole look with this simple pattern.

pattern scheme owl1

Description of the owl pattern scheme

The report of the owl pattern, for the ornament, is 12 loops along with the background of the wrong side. For a single pattern placed on a hat, pocket or other product, the number of loops of the pattern = 8 + the required number of loops of the wrong side on both sides of the owl. There are only 16 loops in our scheme; 8 loops of embossed owl and 4 loops of the wrong side on both sides.

Knit a pattern according to the proposed scheme. On rows 7, 17 and 23, do crossing loops as follows:

Remove 2 front loops on the auxiliary knitting needle and leave at work, knit the next 2 front loops, and after the loop from the auxiliary knitting needle. The next 2 front loops, again remove to an additional knitting needle and leave, now before work. Knit 2 front loops, and after the loop with an additional knitting needle. That's the whole secret of the pattern.

If you understand the principle of weaving loops for an owl pattern, it will not be difficult for you to change the pattern a little, making the owls larger or more embossed. In the ornament, you can simply reduce or increase the number of loops of the wrong side between the owls. As an example of changing the pattern, try knitting the owls according to the second option.

ALL SCHEMES ARE INCREASED, JUST CLICK ON THEM WITH THE MOUSE

Owl knitting 2

The second version of the owl pattern knitting needles is slightly different from the previous one, but the principle of knitting is the same - crossing the loops. The main difference is the embossed belly of an owl, it can be knitted using rice knitting or tangle.

Description of the scheme 2 patterns owl

For the sample pattern, 20 loops were taken without taking into account the edge ones, please note that both front and back rows are indicated in the diagram.

1st and 2nd rows: all loops are facial;
3rd row: purl 1, knit 18, purl 1;
4th, 18th, 19th, 20th, 21st, 22nd, 23rd, 24th rows knit according to the pattern;
5th row: 2 purl, 4 facial loops cross to the right (crossing the loops, as in the previous pattern); we knit the next 8 loops alternately 1 front, 1 purl (for a relief abdomen, later on these loops knit with a tangle pattern or rice knit , that is, shifting the pattern by 1 loop in each row or through a row); Cross 4 facial loops to the left, 2 purl;
6th, 8th, 10th, 12th, 14th, 16th rows: 2 facial loops (for the background of the wrong side), 2 wrong loops (sides of an owl); we knit the next 12 loops alternately 1 facial, 1 purl (for the relief abdomen (pattern pattern); 2 purl loops (owl sides), 2 facial (background);

7th, 9th, 11th, 13th, 15th rows: 2 purl loops (for the background), 2 facial loops (sides), knit the next 12 loops with a patchwork pattern; 2 facial (sides), 2 purl (background);
17th row: 2 purl loops, cross 8 loops to the right, knitting as follows: put 4 loops on the auxiliary knitting needle and leave at work, next. Knit 4 loops, then knit 4 loops from the auxiliary knitting needle; cross 8 loops to the left: put 4 loops on the auxiliary knitting needle and leave now before work, next. 4 loops knit facial, and after 4 loops from the auxiliary knitting needle, 2 purl;
25th row: 2 purl loops (background), cross 8 loops to the right, 8 loops to the left, 2 purl (background);
26th row: 2 facial, 4 purl, 8 facial, 4 purl, 2 facial loops;
27th row: 2 purl, 4 facial, 8 purl, 4 facial, 2 purl loops;
28th row: all loops are facial;
29th row: purl all loops;

owl pattern 2

By decreasing or increasing the number of loops of the report, you can slightly change the pattern itself, making it larger or wider. For example, the 3rd version of the pattern is very similar to the 2nd, but still different.

owl pattern 3

Description of the scheme 3 patterns owl

To knit a sample of pattern 3, cast on 24 loops on the knitting needles: 22 pattern loops + 2 edge loops (edge loops are not indicated in the pattern) and knit according to the proposed pattern and symbols.

Edge hinges- this is the 1st and last loop of the row. As a rule, the last loop in each row is knitted on the wrong side, and the 1st loop in each row is removed without knitting. At the same time, the loop is removed as if it were a front loop, that is, in such a way that the working thread would not create a knot. Then, along the edge of the product, an even spikelet is obtained from elongated loops. Edge loops are also knitted in other ways, but this does not affect the main pattern in any case.

pattern pattern owl-3

1st row: all loops are facial;

2nd row: purl all loops;

3rd row: 1 out., 20 persons., 1 out.;

4th row: 1 person., 20 out., 1 person.;

5th row: 2 out., 6 loops to cross to the right (3 p. remove to additional knitting needle and leave FOR work, wire 3 persons, and after 3 persons from additional knitting needles), 6 loops with a tangled pattern (* 1 out ., 1 person. *), cross 6 loops to the left (3p. remove to an additional knitting needle and leave BEFORE work, pass the next 3 persons. p., and after 3 persons from an additional knitting needle), 2 out .;

6th row: 2 persons., 3 out., 11 loops with a patchwork pattern (* 1 out., 1 persons. * 1 out.), 4 out., 2 persons.;

7th, 9th, 11th, 13th and 15th rows: 2 out., 4 persons., 11 loops with a patchwork pattern (* 1 out., 1 persons. *, 1 out.), 3 persons., 2 out.;

8th, 10th, 12th and 14th rows: 2 persons., 3 out., 11 loops with a patchwork pattern (* 1 out., 1 person. *, 1 out.), 1 person., 3 out., 2 persons.;

16th row: 2 persons., 18 out., 2 persons.;

17th and 25th row: 2 out., 8 loops to cross to the right (4 p. remove to an additional knitting needle and leave FOR work, pass the next 4 persons. p., and after 4 persons. from additional knitting needles), 2 persons., 8 loops cross to the left (4p. remove to an additional knitting needle and leave BEFORE work, wire the next 4 persons, and after 4 persons from the additional knitting needles), 2 out.;

18th, 20th, 22nd and 24th rows: 2 persons., 18 out., 2 persons.;

19th, 21st and 23rd row: 2 out., 18 persons., 2 out.;

26th row: 2 persons., 4 out., 10 persons., 4 out., 2 persons.;

27th row: 2 out., 4 persons., 10 out., 4 persons., 2 out.;

28th row: 2 persons., 2 out., 14 persons., 2 out., 2 persons.;

29th row: 2 out., 2 persons. 14 out., 2 persons., 2 out.

Perhaps you were looking for a completely different owl knitting pattern. Then how do you like this idea?