Homemade Christmas trees from improvised materials. Christmas trees from improvised means

There are a lot of options for making an elegant Christmas tree. Consider those of them that can be made from simple improvised materials. All Christmas trees will turn out to be voluminous.

1. Christmas tree made of cardboard

For a Christmas tree 10 cm high, we need a sheet of cardboard, colored paper and scissors.

Workflow: fold a sheet of cardboard in half and cut it. We put two parts on top of each other and draw a silhouette of a Christmas tree on one of them. Cut out the silhouette along the drawn lines. We cut each of the resulting parts to the middle - one from the top, the second - from the bottom. After that, we insert one part of the tree into another. It remains only to decorate the Christmas tree with the help of figures cut out of colored paper. For example, place a yellow paper star on the top of the Christmas tree, and glue circles on the “branches” that will replace the balls.

According to a similar scheme, you can make a Christmas tree from whatman paper, and also connect not two, but four or six cut out silhouettes to each other - then the Christmas tree will turn out to be especially magnificent.

2. Christmas tree-cone made of paper or cardboard

You will need: a sheet of thick paper or cardboard (color is not important), glue, decorations.

The order of work: we twist the sheet so that we get a cone. Trim the bottom to form a perfect circle. We fasten the craft with glue. This will be the base of the tree. Further, everything depends only on your imagination. You can decorate the Christmas tree with cotton wool, beads, paper snowflakes.

3. Pasta tree

You will need: durum pasta in the form of tubes or curls, a sheet of cardboard, a glue gun or plasticine, paint, decorations.

We fold the base of the Christmas tree from cardboard so that we get a cone. Next, using a glue gun, we begin to attach pasta row by row, moving from bottom to top. On ordinary PVA glue, pasta will not stick. But, as an option, you can stick around the base of the Christmas tree with plasticine and already attach pasta to it. When the glue sets, you can start decorating the Christmas tree. For this we use paint. Right on top of the pasta, you can glue tinsel, beads, snowflakes and any other decorations.

4. Christmas tree made of cones

You will need: fir cones, a sheet of cardboard, Moment glue.

The order of work: we twist a cone out of cardboard, glue it, cut off the bottom side to get the right circle. The base of the Christmas tree is ready. Next, glue the cones in it, starting from the bottom row and moving towards the crown. You can decorate the Christmas tree with beads, nuts, snowflakes, etc.

If you have only one cone available, but beautiful (for example, cedar or pine), then you can make a mini Christmas tree out of it.

You will need: a cone, a flower pot, green paint in a spray can, white sparkles, glue, a brush, a star.

The order of work: using paint, paint the previously cleaned cone green. After the paint dries, grease the edges of the cone with glue and sprinkle with white sparkles. Decorate the top of the Christmas tree cone with a star. We fill the pot with plasticine and put a Christmas tree on top of it.

5. Christmas tree made of feathers

You will need: white goose feathers, a sheet of cardboard, glue, decoration materials, a cup, white paper, white satin ribbon.

The order of work: we make a cone-shaped base of the Christmas tree from cardboard. We attach feathers to it with glue (best of all, construction, so that they hold on tighter). We start from the bottom rows - we attach larger feathers there, and closer to the top - smaller ones. We wrap a plastic or cardboard cup with white paper, fasten the edges with glue. You can decorate the glass with beads, stars, rhinestones, etc. We decorate the top of the Christmas tree with a bow of white satin ribbon.

No less interesting are the options for Christmas trees made of feathers painted in different colors. You can color the feathers yourself or buy ready-made ones. The technology for creating a Christmas tree will be similar.

6. Christmas tree made of buttons

You will need: buttons of different colors and sizes, a sheet of cardboard, glue, beads.

The order of work: glue buttons on a paper cone, alternating different sizes and colors. It is better to glue the buttons with an overlap, so as to completely cover the base of the Christmas tree. Glue a bead to the center of each button.

7. Christmas tree made of wood

You will need: wooden planks, sticks, scraps of old boards, shoe nails, glue, figurines or candles for decoration.

Work order: the Christmas tree is built from square boards and long flat sticks alternately attached to each other. You can attach each subsequent rad to the previous one either with the help of small carnations or glue. You can hang tiny New Year's toys or put small candles on the "branches" of the Christmas tree (it is not recommended to light them).

8. Christmas tree made of felt

You will need: a piece of green felt, a sheet of cardboard, scissors, a marker, glue, beads.

How to work: from the cardboard we fold a cylinder of small diameter (no more than 2 cm) and fasten its edges with glue. We cut out circles of different diameters from felt (the diameter of each subsequent circle should be larger than the previous one). We alternately fold each circle four times and make a cross-shaped incision in the center. From the smallest circle we turn the cone, fasten it with glue. This will be the top of our Christmas tree. We take a cardboard cylinder, string a circle of the largest diameter on it. We do the same with the rest of the circles, in descending order of diameter. We close the top with a small cone. We decorate the Christmas tree with multi-colored beads (they can be sewn or glued).

New Year and Christmas are favorite holidays for children and adults. And it so happened historically that the New Year tree has become a symbol of this holiday. On New Year's Eve, literally every house is full of brightly decorated Christmas trees, and people no longer imagine this fabulous winter holiday without its symbol with prickly green needles. Therefore, you can easily personify the Christmas tree in handicrafts, decorations and various interior details made by yourself.

The main thing in the article

How to make a Christmas tree with your own hands: a variety of options

Mini Christmas trees will be a great addition to the interior of any home or office on the eve of the winter holidays. There are a huge number of options for the execution of Christmas trees "hand made" and materials for them. Minimalism is still in fashion - the simpler the better. Perhaps, it would never have occurred to you to hand-craft Christmas trees in some techniques, but when you see the ideas, you will be inspired to create.

Flat tree on the wall. Decorating the walls of the room came into fashion recently, but is in great demand. As a material for decoration can serve:

• boards,
• pages from old books
• photo collages,
• live spruce branches
• garlands, etc.

Herringbone from coffee beans and burlap.

You can also decorate a New Year's themed panel with the same materials.

Christmas tree toys. With such accessories, you can decorate both the central Christmas tree in the house itself and hang it in prominent places in the room. It can also be free-standing mini-Christmas trees made of lace, fabric. It is appropriate to make a fabric Christmas tree in a house where there are children; the child will certainly not get hurt with soft toys for it.

Creative Christmas tree on a leg or in a pot.

Christmas tree postcard. You can create a greeting New Year's card yourself, using not only paper.

Do-it-yourself Christmas tree made of paper: a step-by-step master class

To make this Christmas tree, stock up on the following:

1. corrugated paper;
2. Cardboard;
3. Scotch tape (regular and double-sided).

Corrugated paper for the Christmas tree can be chosen not only green, on the contrary, a different color will only emphasize the uniqueness of the product. Looks expensive corrugated paper in gold and silver colors.

• Take a piece of cardboard and wrap it in a "cap". Secure the cone with tape to keep it in shape.

• Corrugated paper cut strips 2.5 * 10 cm. The more - the better, for the case they will need a large number. Twist each strip in the center into a kind of bow, bend in half and put one layer on top of the other as shown in the photo.

• Glue the petals around the cone in layers using tape.

• Fix the upper needles with double-sided tape so that all the errors in their fastening do not stand out. Be sure to place a bright decoration on top - an asterisk, a ball, a New Year's toy.

Volumetric Christmas tree made of paper: options with photos

1. Take thick green paper . draw a circle - use a compass or circle a vessel of sufficient size. Inside this circle, approximately in the middle, draw another circle, but smaller. With a ruler draw a circle into 12 parts (sectors).
2. Cut each sector with scissors to the length of the inner small circle.
3. Make an incision along the lines, deep to the inner (second) circle.
4. Form a cone from each sector , the edges of which are fixed with glue. The lower tier of the Christmas tree is ready.
5. Repeat the action with other layers, gradually reducing them in diameter.
6. In the center each part of the Christmas tree poke a hole with a needle .
7. Take wire And bend over its bottom in a spiral.
8. Pass through this wire all parts of the Christmas tree from large to small, close the top of the Christmas tree with a cone of the same paper.

Volumetric Christmas tree - asterisk.

Volumetric Christmas tree with hearts. Such a decoration can be created and to.

If you are interested, then this idea Christmas trees just for you!

• As you can see, there is no green color here, the Christmas tree can be made the way your heart desires.

• Bend and fold all the elements, as indicated in the photo, make cuts with scissors in the indicated places.

How to make a Christmas tree out of paper: options with magazine pages

• Take magazine with many pages so the Christmas tree will look magnificent. Perfect fit magazines - catalogs of women's cosmetics. They are small in height and thick in volume, which will make it possible to make a stable Christmas tree.

It is very important that the magazine is attached with staples, magazines with glued pages will not work.

• Next, fold each page of the magazine as shown in the picture, the fold of the page will be the edge of the herringbone.

• Make a round base for the Christmas tree and glue it to it, it can be cardboard, or you can take an old disk. Attach a leg to the very base, taking a spray cap or a cardboard roll from toilet paper. The main thing is to choose a stable object.

• The colorful pages of the magazine already look elegant, but it’s better to decorate the Christmas tree even more. Anything you can get your hands on will work: tinsel, buttons, shells, brooches, etc. Attach them with glue to the bent edges of the Christmas tree.
• You will need a very small amount of decorations. These Christmas trees are made from what is often thrown into the trash. And look how beautiful it turned out!

How to make a Christmas tree out of cardboard with your own hands

Make such a Christmas tree from cardboard and burlap. In this work, you will need a minimum of effort, and get the maximum beauty.

• Roll a cardboard sheet into a cone fix the edges with glue.
• Liberally cover the top layer of the resulting figure with glue and wind the thread from the top to the bottom, pressing firmly, there should be no gaps.
• Decorate the Christmas tree with a garland of beads, fix it with needles.

If you have a small child, help him make such a simple but very cute cardboard Christmas tree.

• Cut out a triangle for the “body” of the Christmas tree and a rectangle for the legs from cardboard. As a material, you can use a cardboard box, so the product will look more spectacular.
• Paint the details and let them dry.

• Decorate the Christmas tree with colorful buttons. At the very end, attach the leg to the Christmas tree.

• On such a Christmas tree, made by children's hands, all the flaws will look very gentle and touching.

DIY Christmas tree made of fabric and felt

Herringbone fabric:

• You can use the template below, or you can draw your own. Fold the fabric in half, right side in and circle the pattern . Sew along the outline or sew by hand. The leg of the Christmas tree does not need to be stitched.
• Open the stitched part without deviating much from the line. You can use zigzag scissors , then the edge will not need to be processed.

• Turn the Christmas tree inside out on the front side iron , wrap the leg inward. Fill the product tightly with synthetic winterizer.
• Finish the open hole with a blind stitch.

• Now start decorating. Make skirts out of fabric and lace by gathering one edge of a piece of fabric onto a thread. Sew on the top and bottom skirts, slightly stepping back from each other. Do the same with bows and buttons. Or use a heat gun.

• Attach an empty spool of thread as a hemp.

Christmas tree made of felt:

Take:

• pieces of felt fabric of different colors;
• dense cotton or nylon threads;
• thick fabric for patterns;
• thread with a big eye;
• buttons;
• scissors.

• draw a pattern the Christmas tree that you want to sew. You can apply one template for all pieces of fabric, or you can draw and then sew different Christmas trees.
• Buttons will serve as decoration , so to speak, "balls" on the Christmas tree.

• For one Christmas tree cut out two pieces the same color. Sew buttons to one piece. On the front side, carefully sew both parts, fill with filler.

• Instead of buttons, you can cut multi-colored circles from felt. Attach loops to hang toys on a real Christmas tree. All is ready!

How to make a Christmas tree from beads with your own hands: instructions with photos

• Even those who are just starting to weave from beads can make such a simple, but exclusive Christmas tree. It can be used as jewelry: earrings, brooch, key chain and more.
• This scheme uses parallel weaving technique. cut the wire 50 cm long. Thread 4 brown beads through one end, thread the other end of the wire from the same side and fix in the center. Repeat this for the second row.
• Thus, weave 4 green beads in the third row. And then thread 7 beads through each end of the wire, this is the completion of the 3rd row.
• Run the fourth row with 16 beads.

• Weave like this, reducing each row by two beads , until 5 beads remain on the wire.
• Weave rows of: four, three, two, and one bead.
• Finish the work by closing 4 orange beads in a ring - this is an asterisk.

And more options for voluminous table Christmas trees made of beads.

Crocheted Christmas tree with your own hands

• 1 row: Start with 2 chain stitches, work 4 single crochets into the second stitch in front of the crochet hook.
• 2 row: 4 single crochet.
• 3 row: increase (2 sc in one loop), 1 sc - repeat 2 times.
• 4 row: from now on, knit the even rows behind the back wall, and the odd rows in the usual viscous. In each even row, increase, and then knit the number of sc, 1 sc more than in the previous one. For example, in this row there is an increase, then 2 sc - repeat 2 times, 8 loops should come out.
• 5 row: Each odd row, knit single crochets in the amount from the previous row, for example, this row is 8 sc.
• Knit like this until the 19th row, you should get 22 loops, do not forget to alternate regular knitting and knitting for the back wall of the loop.

The base of the Christmas tree is ready, now you need to make thorns for it:

• Do not rush to cut the thread, now move from the base to the top. Knit 3 VPs and fasten in the 18th row (where you knitted for the back half loop), just the time has come to knit for the second half of the loop. In each loop of this row, repeat the action - 1 sc, 6 ch, 1 sc.
• Now dial 3 VP again and fasten them in the 16th row, repeating the previous steps, and then in 14.
• Knitting the 12th row, instead of 6 VP. perform 5 VP, fixing them with 1 RLS on the sides.
• Moving to the top, in each subsequent row, reduce the number of loops: 10th, 8th rows - 4 VP, 6th row - 3 VP.
• So the Christmas tree is ready, decorate it with large beads.

Christmas tree with your own hands from tinsel

1. Such a Christmas tree looks expensive and elegant, although it is mastered very quickly.
2. On paper or a large sheet of thick paper (cardboard) draw a big circle. The diameter of the circle will be equal to the height of the Christmas tree. Try to draw by hand as straight as possible. It is not necessary to draw a whole circle, to form a cone enough to draw and cut only half of it.
3. Cut out the fabric with scissors and roll up his into a cone , fix the product with adhesive tape. Here is the frame for the Christmas tree.
4. Soak it with glue, and then in a spiral, starting from the top, glue the tinsel. The remnants of the "rain" from past holidays are perfect. For a Christmas tree 30 cm high, you will need approximately 3 m of tinsel.
5. Let the tree dry. It doesn't matter if gaps are visible, they can be hidden with decorations.
6. Now decorate the Christmas tree with toys it is better to fix them with a hot gun.
7. From improvised means, make a stand on which the Christmas tree will be attached and attach it to it.

How to make a Christmas tree from flower mesh and threads?

As it has already become clear, a Christmas tree can be made from anything. If you have leftover flower nets at home after the presented bouquets withered, this example is exactly what you need. The standard option is a floristic grid of green shades, but you can use completely different shades, fantasy accessories are now in fashion.

• Roll up a piece of paper so that the cone comes out - this will be the frame of the Christmas tree. It is better to take thick paper. Attach the edges with a hot gun. The cone is white, which means it will shine through the flower mesh. To avoid this paint his watercolor paints in the tone of the grid, or in a different color, creating a contrast.

• Prepare stripes from a flower mesh , 7 cm wide, the length will be the length of your mesh web itself. The Christmas tree needs to be layered so that it does not look too skinny. The first layer should be the darkest, and all the rest should be lighter.
• Fastening start from the top to the base , twisting the strips into curls, gluing them in a spiral.

• So the beauty is ready - the Christmas tree, but I want to add something to it. Take a piece of satin ribbon, cut it into pieces of approximately 15 cm, tie beautiful bows from satin stripes.
• Attach thermal gun bows to the grid . Such a Christmas tree can please loved ones, or you can decorate a festive table.

Or decorate like this, and fasten the mesh with ordinary PVA glue.

How to make a Christmas tree from candies with your own hands?

A very original gift for the New Year was a Christmas tree made of sweets. Do not be mistaken that such presents are made only from expensive chocolates; lollipops are also perfect for this purpose. You can dilute sweets in the manufacture of a Christmas tree with tinsel, garlands or beads. And if such a Christmas tree is intended as a gift for an adult, then a bottle of champagne is perfect as a basis - a very symbolic gift.

Christmas tree made of chocolates.

• Make a cone, golden cardboard will look beautiful as its base.
• Then use tape or glue to fix the candy around it.
• Decorate the top with a large bright bow and star.

Christmas tree made of gelatin sweets.

No need to write off gelatin sweets, such a Christmas tree will look very original. In addition, most people prefer such sweets.

For the frame, take the foam, and string the sweets on the Christmas tree with toothpicks. This design is easy to disassemble, so it will be appropriate as decoration on buffet tables.

Do-it-yourself Christmas tree from ribbons

• With sharp scissors cut out the squares from a tape 5 * 5 cm.
• Roll each one into petals as shown in the photo, solder the edges over burning candles.

• On attach cardboard cone glue gun "branches" of the Christmas tree . Then decorate the tree with ribbons of other colors.

Do-it-yourself Christmas tree made of cones

A cone is a ready-made Christmas tree in a miniature version, you just need to figure out how to decorate it beautifully. Before starting complex compositions, practice with easy examples.

The best photo examples of Christmas trees do it yourself

Christmas tree from tea bags- a useful gift.

Fabric triangles - Christmas tree pendants.

Christmas tree stand or hanger.

Christmas tree made of corrugated paper and large beads.

Christmas tree made from coffee beans.

"Puff" Christmas tree made of fabric.

Flat Christmas trees made of burlap.

Christmas "table" Christmas tree made of acrylic threads in 2 execution techniques.

Making a Christmas tree with your own hands: video master class

You can make a Christmas tree with your own hands from any improvised means. Connect your imagination and enjoy the New Year holidays by making such wonderful things.

The Christmas tree decorated with toys has long been considered a symbol of the New Year holidays. And putting it in the house is a good tradition, as well as a way to create a special solemn atmosphere. But it often happens that due to constant employment, lack of free time, it is not possible to poison yourself for the acquisition of a green beauty. Some people who are in love with nature do not want to destroy a living tree in order to enjoy the fresh coniferous smell in the apartment and elegant appearance for a couple of weeks. It is in such situations that it will become more relevant than ever DIY Christmas tree, photos, ideas and 100 workshops on the manufacture of which we will tell in the home-ideas.ru blog.

DIY Christmas balls

DIY Christmas tree made of paper for the New Year

A paper Christmas tree has the largest variety of ideas and options for putting them into practice.

Templates and schemes for making paper Christmas trees

The easiest way to create a Christmas tree out of paper is with a ready-made template. To do this, it is necessary to print the selected figured scheme on thick sheets. Cutting it along the contour is carried out using a special clerical knife or, in the absence of such, using nail scissors. Each Christmas tree blank should be bent in half and the parts of the tree glued together. Get an unsurpassed openwork option.

How to make paper snowflakes - http://home-ideas.ru/2015/12/kak-delat-snezhinki-iz-bumagi/

Below are diagrams and openwork patterns of different levels of complexity that are interesting for creating a Christmas tree from paper with your own hands, which can be used not only by an adult, but also by a child.

Master class on creating a fluffy paper New Year's beauty

There are other ways to make a festive paper tree. And for a visual representation of how a fluffy Christmas tree is created with your own hands - a master class presented below.

To implement such an idea, you will need a list of necessary materials:

• cardboard;
• colored paper;
• glue;
• scotch;
• scissors.

Crafts for the New Year with your own hands

Step-by-step instruction:

1. Make a cardboard cone that will be used as the base for the tree. You need to fix the cone with glue so that it does not unfold.

2. Cut sheets of colored paper into thin strips.

Important! It is necessary to carefully monitor that the stripes have approximately the same length and width. This will give the tree a neat, aesthetic appearance.

3. Glue the edges of the stripes to get loops. Also done with glue.

4. Glue the finished eyelets onto pieces of double-sided tape.

5. Wrap the cone-base with adhesive tape with eyelets in the direction from the bottom to the top. The result is a cheerful "shaggy" Christmas tree.

Herringbone from beads: a master class on the realization of the idea

And now the attention of readers is invited to a Christmas tree made of beads - a master class with a step-by-step photo. For such a creative process, you need to stock up:

• wire with a diameter of 0.25 mm;
• green and gold beads.

First you need to dial 9 green beads and 1 golden one on a piece of wire about 40 cm long. Without touching the golden bead, it is necessary to pass the second end of the wire through the green beads in the opposite direction. Thus, a needle is created for the future New Year's green beauty.

How to install a Christmas tree

At the next stage, you need to align the wire clearly in half, tighten the ends tightly. On each side, a couple more needles of this type should be made.

Important! It is necessary to arrange the needles so that they are next to each other as close as possible. This will give the product a neat appearance.

From such small branches, a large branch for the Christmas tree should be formed. For the upper branches, you need to use 10 small branches, pre-harvested, and for the lower ones - 15 each.

It is necessary to collect a Christmas tree from beads in this order:

• for the top - one small branch;
• for the second tier - three large branches, each of which consists of 10 small ones;
• for the third tier - four large branches, each consisting of 10 small ones;
• for the fifth tier - five large branches, each of which contains 15 small branches.

The number of tiers and large branches in them may increase depending on how high the product is planned to be made. The photo below shows step-by-step weaving:

DIY Christmas tree made of felt

A fairly simple way to make a Christmas tree made of felt with your own hands is considered. Such a souvenir can be used as a New Year's gift for friends or acquaintances. The advantages of felt as a material for a Christmas tree are that it is able to keep its shape well and is not prone to shedding.

To make a felt New Year's beauty, you need to use an arsenal of materials and tools, consisting of:

• felt;
• cardboard;
• adhesive tape (glue);
• scissors.

First you need to prepare a cardboard cone, which is fixed with adhesive tape or glue.

At the next stage, you need to cut out circles from felt, different in diameter - as they grow. You can pre-prepare cardboard circles-templates.

The base of the cone must be decorated with tinsel, which is also attached using glue or tape.

On each of the cut out circles of felt in the center, an incision should be made “crosswise” and put on them sequentially - from larger to smaller - on the cone. When all the pieces of felt are on the tree trunk, the resulting beauty should be decorated at the crown with an asterisk, and along the entire height with tinsel.

Simple Christmas trees from improvised materials

If there is very little time left before the New Year celebration, and the main symbol of the holiday is still not in the house, you can make a New Year tree with your own hands from improvised materials, while spending a minimum of time and resources. Consider several interesting options for such unpretentious creativity:

1. Christmas tree from a plastic bottle. Surely every house has a plastic bottle painted green for a long time. For this purpose, the container itself must be cut into rectangles (5-6 pieces to create tree tiers). Each of the rectangles should be cut into small strips, not reaching the top edge. Such cut rectangles must be wrapped around a pre-prepared cardboard cone and secured with adhesive tape. Dressing the Christmas tree in needles should be from the lower tier, moving to the top.

Making a Christmas wreath with your own hands

2. Christmas tree from leftover yarn. Extremely easy to manufacture. Even a small child can handle this process. As in the previous case, you need to make a cone out of cardboard and fasten it with tape / glue. Then the cardboard frame must be well lubricated with the same glue and wrap the yarn around it, leaving no gaps, tightly. Beads and sequins are used as decor.

3. Christmas tree made of tinsel. The step-by-step execution of such a souvenir completely repeats the version with yarn with one difference - instead, the remains of New Year's tinsel are used.

4. Sweet Christmas tree. Its distinguishing feature is the use of sweets as decoration. They are often superimposed on a product made of tinsel. It is recommended to attach sweets with double-sided tape.

5. New Year's beauty from pasta. It will take more time and care to make it, and perseverance will not hurt. As before, the process must begin with the preparation of a cardboard cone. It should be greased with glue and proceed to stick pasta. When the pasta is glued along the entire length in the required quantity, they can be painted with all kinds of colors of paints.

6. Creative Christmas tree made from old magazines. To implement such an idea, glossy pages with colorful pictures are best suited. It is necessary to form a cone from cardboard, which is fixed with adhesive tape or glue. From magazine leaves, a large number of circles of the same diameter should be cut. Each of them must be wrapped around the pencil so that they take on a swirling look. Such twisted pieces of magazine pages should be pasted on the cone in the direction from bottom to top. The crown of the beauty must be decorated with a small glossy cone.

If it is almost New Year on the calendar, and the green symbol of the holiday still does not decorate your home, there is absolutely no reason for frustration. After all, the variety of ways to make Christmas trees allows you to make them in a matter of minutes from the most primitive and unpretentious materials, and the product itself, despite its simplicity, will look interesting and original.

28 Christmas Decorations You Can Make in 10 Minutes

If you want to have as many Christmas trees as possible in the house during the holidays, or if you are going to accompany each gift with a homemade Christmas tree, these ideas will definitely appeal to you. We have collected for you the simplest Christmas trees that you can make with your own hands from improvised materials. You will spend a minimum of free time on the manufacture of each of them, and the result will be impressive.

Christmas tree from a magazine or postcard

Most likely, all the necessary materials for making this simple Christmas tree are on your desktop right now.

What will we need?

• magazine, postcards or colored cardboard
• a simple pencil or pen
• thin ribbon for gift wrapping
• any stand
• Super glue

Tip: as a stand, you can take a bucket from a children's designer, a candlestick, a glass, etc. We need to make an imitation of a bucket in which the New Year's beauty is traditionally placed

We cut the magazine into squares of different sizes, and then we fold each of them with a cone and insert them into each other like a pyramid. You can make a fringe. The tip of each cone must be smeared with glue.

You can make one large cone, and then just paste over it with pieces of magazine clippings or a cut postcard.

As a rod, we take a simple pencil (they are often beautiful - then they don’t even need to be decorated) or a pen. We cover them with glue and tightly wrap them with tape.

We insert the pencil with one end into the cone, with the other into the bucket, so that the structure is stable. The bucket can be filled with plasticine or cotton soaked in glue.

This simple Christmas tree will brighten up your office desk and make a great addition to any gift.

Christmas tree made of coins

If you want to wish someone wealth in the new year or attract it to yourself, make a Christmas tree out of coins. It is believed that this accessory attracts financial well-being.

What will we need?

• thick cardboard (not glossy)
• coins of the same size
• Super glue

We turn the cardboard into a cone and glue the side seam.

We stack the coins in even rows, gluing them to the “moment”. To create the effect of twigs, you need to start from the base and move to the crown.

Don't make the cone too big. You always need more coins than it seems at first glance.

Christmas tree made of thread or twine

For those who like a minimalist design, this Christmas tree will be the best option.

What will we need?

• thick cardboard (not glossy)
• skein of twine or yarn
• PVA glue

There are two ways to make this simple Christmas tree.

First, prepare a cardboard cone and securely glue the side seam. Then we do the winding.

First option

We coat the cone with glue and tightly wind the thread around it, moving from the crown to the base. In this case, it is better not to coat the entire tree at once, but to do it gradually so that the glue does not have time to dry and you do not get your hands dirty.

Second option

Pour the glue into a bowl and dip the threads there for a few seconds. Then we do the winding. In this case, the finished craft can be immediately sprinkled with dry sparkles so that it flickers.

Such Christmas trees can be additionally decorated with light plastic balls or wrapped with a garland.

Christmas tree from tea bags

A great way to present an ordinary gift in an original way.

What will we need?

• toilet paper roll or cardboard
• a pack of tea
• double sided tape

We glue a narrow strip along the entire diameter onto the cylinder. Then we simply “seat” the bags so that we get a semblance of twigs.

If you can’t form a Christmas tree, paste over a cylinder rolled up from a piece of cardboard.

You can replace the tape with glue, but it's better not to do this. If you use tape, the gift recipient can easily remove the tea bag when they want to try it.

You can complete the composition with a cardboard star or some interesting candy.

Christmas trees made of fabric

This idea seems difficult, but it is not quite so. Of course, it will take time to prepare the fabric. But if you have fabric swatch kits that are often found in art departments (or quilting kits), the process is very fast.

What will we need?

• square pieces of fabric in different sizes
• pencil, knitting needle, stick for sushi or balloon

The process of assembling a Christmas tree is similar to a children's game of pyramids. It is tedious to simply string pieces of fabric of different sizes so that they overlap each other with scales.

True, if you don’t have ready-made sets, you will have to sheathe each square for a really long time. But such a homemade New Year's gift will be nice to receive to your loved ones.

The finished craft can be completed with an asterisk or a pom-pom.

Christmas tree made from natural materials

This tree will last you a very long time. In addition, this accessory smells very tasty.

What will we need?

• smooth and thin rods
• five thick branches of the same length
• thin wire

Tip: if you do not have rods, but you like the idea of ​​\u200b\u200bdecorating a Christmas tree, replace the rods with twine or thick wire

Connect five branches of the same length together to form a cone. At the top, tightly pull them into a pile with a wire. And then connect the branches at a distance from each other. The wire will not let them scatter and make the structure stable.

Wind the workpiece with rods or other material, simultaneously winding them with wire in a perpendicular direction so that they do not scatter.

The finished Christmas tree can be decorated with artificial snow.

All these Christmas trees made from improvised materials will perfectly fit into any interior. Give them to friends or put them at home. This is unusual and very beautiful!

Views: 1 296

Each of us remembers the celebration of the New Year, especially a beautiful Christmas tree with toys, garlands, confetti and candles. In order not to buy a real Christmas tree or make some kind of addition to it, it is possible to create decorations for the holiday from what is at hand. This craft will surely delight your family and friends.

To create a Christmas tree from the pages of magazines, you need to prepare:
a magazine that has already been read and just lies idle;
a sheet of cardboard with glue;
flat stick or pen.

Form a cone shape from a cardboard sheet and fix it with glue. Cut out circles or flowers of equal diameter from the pages of the magazine. Ready circles should wrap a flat stick or pen. Then we begin to glue the circles on the cone from the bottom edge so that the base cone is not noticeable. For the top of the Christmas tree, we form a small star and glue it on top. It turns out a colorful and unusual Christmas tree.

Version of the Christmas tree from the sheets of the magazine

By the New Year, you can make a Christmas tree from paper gift wrapping.

For this you should have:
wrapping paper;
a sheet of cardboard;
scissors with tape;
serpentine, beads, sequins, tinsel.

We fix the conical shape with tape and cover it with wrapping paper. We also connect the edges of the paper with tape, the excess must be cut with scissors.

An unusual and beautiful craft will be a Christmas tree that glows. To create such a craft, you should stock up:

Floral wire and mesh;
a sheet of cardboard;
cellophane with scissors;
PVA glue and pins;
decor.

First, we form a conical shape from a cardboard sheet.

Then wrap it in cellophane. Next, you need to cut the floristic mesh into middle parts and coat them with glue. These parts should be glued to the cellophane, the structure should be fixed with pins and wait for the glue to dry. Now repeat the steps again. When the cone is completely dry, it is necessary to remove the cellophane from it. Put a garland with lights inside the cone and secure it with pins. Decorate the outside of the Christmas tree with sparkles, stars or serpentine. Plug the garland into a socket and enjoy a beautiful craft!

foam cone;
spray paint or gouache;
pasta of various shapes and sizes;
brush with PVA glue.

We begin to paint the foam cone, we wait until the workpiece becomes dry. Next, you need to glue the pasta to the base. After that, they should be painted with two layers of paint or gouache. should dry well. Alternate the pasta so that the Christmas tree is even and repeats the shape of the cone.