home » landscape design » Paper carnation. Do-it-yourself carnation from a napkin: a master class, step-by-step instructions and a photo How to make a carnation from napkins step by step

Paper carnation. Do-it-yourself carnation from a napkin: a master class, step-by-step instructions and a photo How to make a carnation from napkins step by step

Is it possible to find a house that does not have at least a couple of dozen napkins? Probably not in today's world. And how many people know what else you can use a napkin for? A napkin can be used not only as an alternative to a towel, but also as an origami material, for example, for making flowers. And so the topic of our article: flowers and carnations from a napkin quickly and easily with your own hands.

Using napkins in origami can give them a second life that turns seemingly nondescript napkins into beautiful flowers. Making a flower from a napkin is quite simple and anyone can easily do it.

We collect a carnation and a rose from a napkin with our own hands

This photo shows the steps that we will perform in stages.

Our master class will explain the essence of the whole process as clearly and clearly as possible. And so, let's get started.

For flowers from napkins, most often they take single-layer or three-layer napkins. In most cases, preference is given to three-layer. It is from them that the most beautiful and voluminous flowers are made. If you do not have three-layer napkins, then you will need two single-layer ones. One will be red - for the flower, and the other - green - the role of the stem.

We start by making a flower. To do this, unfold and straighten the napkin. We measure the third part by eye and cut off from it. The resulting piece is folded in half. We bend its upper part. Wrap the upper part of the strip around the left index finger. With this action, we will get a blank for the bud. We twist the napkin along the bottom edge. Look carefully at the corners, one of them will definitely stand out. It is for this corner that we need to pull and bend it to the side. We straighten the bud and try not to crush the petals.

We make the stem from a green napkin, as already written above. We take a napkin and twist it around the tip of the bud. We twist it to the end and make a leaf. In order to get a leaf, you need to gently pull the edge of the napkin and highlight the corner out.

Our rose is ready! Let's move on to the next flower.

We collect quickly and simply summer dandelion

Photos with actions to be performed.

Such a dandelion will have an even base. And it looks great on a postcard.

We need a three-layer napkin, which must be divided into layers. Take two layers and fold them four times. Put these two layers together on top of each other. We staple the layers crosswise.

Carefully cut out a circle from the resulting workpiece. In the resulting circle, we make cuts of the same depth and the same angle between them. Try to make the corners as even as possible, otherwise the dandelion will turn out to be not very symmetrical. After all the cuts are made, we begin to lift the top layer and compress it closer to the central part. The bud is ready.

When creating foliage and stem, you can show your creativity. Well, whoever doesn’t want to come up with something can do the same as in the last picture.

We start by tearing off a small part from the napkin, about one centimeter wide. Just tear off! No need to cut with scissors! If we tear off, then we give naturalness to our bud. The main thing is to make sure not to tear off the fold. We unfold the napkin and fold it like an accordion in the form of a bow. With the torn off part we rewind our butterfly in the middle.

Select a layer on either side of the bow and separate it. We do this action with each layer. One of the parts of the bow can be fixed with a stapler. It is this layer that will serve as the base of the bud.

That's all! The carnation is ready. Application and not only can be obtained from a combination of several different flowers. When compiling applications, one should not forget that in nature, carnations are also white, pink and tea-colored.

An explanation of why it is necessary to tear off, and not cut off part of the napkin, in the first step. If this is not done, then you can get a different flower, unknown even to science. It is here that the space of creativity and fantasy opens up for you. Try trimming with some kind of pattern, and you will get a completely new flower every time.

With the help of glue, it can attach flowers to some surface, whether it is colored cardboard or fabric.

Making such flowers from napkins, as well as from paper, refers to the origami technique that originated in Japan. Origami allows you to train mindfulness, patience, perseverance. It has also been proven that origami develops hand motor skills very well. The origami technique requires many small and precise movements that train the fingers well.

And here is a small selection of videos dedicated to making flowers from paper and napkins.

From simple napkins you can create magnificent plants with which you can decorate a table for a celebration, it is interesting to decorate a gift, or just make a beautiful large bouquet and put it in a vase. One of the most realistic and delicate flowers you can make is the carnation. And if you choose the material of beautiful and bright colors, then the carnations will turn out to be very rich and eye-catching. Making them is very easy. So, let's see how you can make carnations from napkins with your own hands. A master class on this topic is offered in this article.

Security measures

If you have children, it would be great to bring them. A child studying in elementary grades may well create such a flower, of course, under your strict guidance.

When working with a child, remember:

Before work, scissors and compasses must be in a case.
During work, you can not be distracted.
Scissors and compasses should be used only for their intended purpose, do not let the child play with tools, otherwise he may get hurt.
You need to cut yourself.
Pass the scissors rings forward.
For safety reasons, do not leave the scissors open and on the edge of the table.
The compasses are passed folded with the blunt end forward.
Do not leave the compass open, do not hold it upside down.
Put your tools away after work.

Master class on creative work

How to make a carnation from napkins with your own hands? To do this, you will need plain paper napkins of bright, beautiful shades - pink, scarlet, red, yellow:

We take several pieces of cellulose material, fasten them in the middle with a stapler.

Important! The more napkins, the more fluffy the flower will be.

We make a circle with a compass, with a radius of approximately 4 cm.
Cut out the circle.
At the resulting circles, paint the edges with a marker.
We make a hole in the blank for the stem. This can be done with a compass or an awl.
Insert a cocktail tube into this hole.

Important! If you have green paper, you can roll it into a tube and use it as a stem.

We fix the tube with a piece of plasticine.
Carefully separate the top layer, lift it to the center.
Do the same with all layers.

You can arrange a whole bunch of such carnations and put them in a beautiful vase.

Postcard with carnations

How to make a do-it-yourself carnation from a napkin for a postcard? For postcards, it is better to take material of a red tint - it looks beautiful on light paper. Then we begin to create, adhering to the points of work in this master class:

We take a multilayer napkin, draw a circle on it.

Important! The circle can be drawn with a compass or a jar lid.

Cut out the circle with scissors.
We fold all the resulting layers, first once in half, then again.
We fasten with a stapler.

Important! If there is no stapler, you can use a needle and thread - you need to complete one stitch.

We make cuts with scissors. The preparation is ready.
For one flower you will need two such blanks.
We take green paper and cut out the stem, leaves and sepals from it. For the sepals, take a square of green paper, fold it diagonally and cut off one edge rounded.
We fold it like a bag and insert both blanks for the flower there.

footage

You can make several carnations for one postcard in the same way. If the card is for Victory Day, then you can supplement it with a St. George ribbon and a star. The main thing is to understand the principle and the main idea of doing such crafts with your own hands, then the whole process will go more interesting and faster.

Using napkins in origami can give them a second life that turns seemingly nondescript napkins into beautiful flowers. Making a flower from a napkin is quite simple and anyone can easily do it.

We collect a carnation and a rose from a napkin with our own hands

This photo shows the steps that we will perform in stages.

Our master class will explain the essence of the whole process as clearly and clearly as possible. And so, let's get started.

Our rose is ready! Let's move on to the next flower.

We collect quickly and simply summer dandelion

Photos with actions to be performed.

Such a dandelion will have an even base. And it looks great on a postcard.

We need a three-layer napkin, which must be divided into layers. Take two layers and fold them four times. Put these two layers together on top of each other. We staple the layers crosswise.

When creating foliage and stem, you can show your creativity. Well, whoever doesn’t want to come up with something can do the same as in the last picture.

With the help of glue, it can attach flowers to some surface, whether it is colored cardboard or fabric.

And here is a small selection of videos dedicated to making flowers from paper and napkins.

Good afternoon, dear needlewomen!

In our past classes, we learned how to make paper roses, they are suitable for a gift to mom, teacher, sister. And what to give dad, grandma or grandpa on February 23 or May 9? And for them there are suitable flowers - carnations.

The carnation is a symbol; after the Second World War, this flower began to personify the victory of the Soviet Union. Carnations are given to veterans, defenders of the fatherland.

How to make a carnation out of paper?

In our article you will find two master classes on how to make a do-it-yourself carnation from paper or napkins in stages:

The first version of carnations made of corrugated paper,
And the second option is the application of a carnation from a napkin for a postcard for March 8, February 23 or May 9

DIY corrugated paper carnation

In order to make carnation flowers from corrugated paper, we cut out a strip of 6-7 centimeters from paper.

The strip should be approximately 40 centimeters long.

As we cut out a strip of corrugated paper, we stretch the corrugation.

If you have curly scissors, trim the edges of the corrugated paper with them.

now fold the ribbon with an accordion.

Making a few cuts with scissors

We stick paper on a stick, we form a carnation.

When the carnation flower is wrapped around the stick, we fix it with a thread.

For the stem, cut out a strip of green corrugated paper.

Glue the sepals in place and onto the stem.

We straighten the petals of carnations from corrugated paper.

Do-it-yourself corrugated paper carnation is ready! Give a bouquet to your defender of the fatherland - dad or grandfather on February 23 or May 9!

Corrugated paper carnation looks very realistic, and its petals are like real ones! For the master class, we thank the Haykanush channel.

Video: How to make a do-it-yourself paper carnation

Do-it-yourself carnation from napkins (application for a postcard)

In order to make a carnation flower for application on a postcard, we need the following materials:

scissors
colored napkins
white paper or card base

So, we make carnation flowers from napkins with our own hands - an application for a postcard for February 23. We bend the colored napkin in half.

Cut it with scissors along the fold line.

We will have 4 squares.

Let's bend each of the squares separately.

Then we form carnation petals from each triangle.

Making cuts with scissors

This is how it should turn out.

We twist the ends of the carnation petal from the napkin.

Here is the finished carnation petal.

We repeat the same with all the petals of the carnation.

To form a carnation stem, cut out such a rectangle from a green napkin.

We twist it.

Here is our stem.

In order to make flower leaves, cut a rectangle from a green napkin.

We twist it at the bottom and at the top, forming flower leaves from a napkin.

First a stalk of a carnation,

Then the petals of the carnation,

From a green napkin, form the sepals.

The final step is to glue the leaves to the flower. Carnation from napkins in the form of an application is ready!

Such an application on paper in the form of a postcard made by one's own hands can be presented to mother, grandfather, grandmother for any holiday - March 8, February 23, Defender of the Fatherland Day.

Thank you for the master class channel "Favorite Lesson". Also watch the video tutorial with a step-by-step description.

Video: how to make a carnation out of paper

Text prepared by: Veronica

Carnations are beautiful decorative flowers that delight our eyes in parks, squares and home lawns. There are many different varieties of this flower, but only three can be called popular: large, mini and dwarf.

In this master class, I will show several options - how to make do-it-yourself paper carnations with step-by-step photos and videos. Carnations are most often presented as veterans, as well as for grandparents' birthdays.

Also, this flower will look great on a do-it-yourself volumetric application for mom for some holiday, for dad for Defender of the Fatherland Day, for grandfather by May 9th. Once you see the raft of your creativity, you are sure to find a worthy use for it.

What is summer without flowers?! So we boldly take corrugated paper, which can be easily replaced with plain napkins. From such a light and thin material, we can easily get a delicate flower with bright red petals.

In addition to corrugated paper, green semi-cardboard will come to the rescue. You can’t do without it here, because you need to add a stem, receptacle and leaves to the bud.

Necessary materials:

red corrugated paper;
green semi-cardboard;
scissors;
pencil;
glue.

Manufacturing steps:

1. Draw an even circle on the green semi-cardboard. We cut along the contour and get a template that should be transferred to red corrugated paper. To do this, draw the outline of the template five to six times with a pencil.

2. Cut out all the details along the contour. We get ready-made elements for creating petals.

3. We put all the circles of corrugated paper in a pile.

4. Bend the lower part up in half.

6. With scissors we create many cuts along the upper round edge.

7. Open the blank once and get a clove bud.

9. Glue the receptacle to the center of the red carnation bud. Next, we attach the stem, and to it - two leaves.

10. All layers of corrugated paper in a carnation bud should be carefully spread to obtain lush petals.

11. So a cute corrugated paper carnation flower is ready, where half-cardboard was used as an addition.

These have a flat look, so they are ideal for creating some kind of "zest" on the front of the postcard.

This variety of carnations can be immediately distinguished from others due to the fact that they have only one large flower on the stem. This is what we will learn to do from the available material.

Necessary materials for cloves:

red corrugated paper;
teip tape tape;
wire;
scissors;
glue;
pencil;
ruler.

Manufacturing steps:

1. To create a carnation bud, you need to take red corrugated paper. Also, this material can be easily replaced with crepe paper or plain plain napkins.

We measure the dimensions of 20 x 7 cm on the strip. Cut it out and get a long strip. Bend the top down 2 cm.

2. Cut off a small piece from the floral wire. Attach one end to the right side of the paper strip. You can immediately prepare a few more blanks in the form of paper strips to immediately get a whole bunch of red carnations.

3. Now we will make small teeth along the entire upper edge with small scissors with a sharp end.

4. We begin to twist the red strip around the wire. We create several folds to get a three-dimensional flower.

5. Glue the end of the corrugated paper to the wire. As a result, we get a magnificent clove bud with small cloves.

6. We create a receptacle at the bottom of the craft using a green teip tape, which should be tightly wrapped around the bottom of the red corrugated tape. Next, we move on to thin wire.

To give it the necessary texture and color, you should grab the teip tape again. We wrap it tightly around the entire length of the wire. Also, if desired, large leaves can be cut from it to the stem of the flower.

7. As a result, we will get a cute crepe paper carnation flower in a short period of time. We create a couple more of these flowers in the same way and get a cute bouquet for any holiday.

These flowers are artificial, so they do not need water and careful care. So they will decorate the interior of the room for more than one week and even more than one month!

If you want to know the easiest way to create a crepe paper carnation flower, then this article is exactly what you need. The resulting flower will be bright if you take the right paper, airy if you use enough layers, small or large as you wish. In fact, there is nothing difficult in such work.

To learn how to make a lush flower, prepare the following materials:

corrugated paper - bright or white, pale pink;
scissors;
cardboard circle template;
thin wire or thread with a needle.

How to make a carnation with your own hands in stages

Prepare a minimum weight corrugated paper roll. In the process, you need to make thin layers, crumple them, so soft paper is better suited. Cut the strips, adjusting the width depending on the size of the bud you want to make. Cutting off the desired strips, you can move along or across the roll, in this case it does not matter.

Fold one or more strips in a zigzag pattern to make a square layered piece. Our task is to learn the easiest way to model a flower, so all layers will be processed together at once, and not separately. This will save a lot of time.

Holding the folded tape in this position, use a thin wire or needle to make 2 holes clearly in the center. Thread the ends of the wire into the holes obtained and twist or sew with threads.

Thus, you fasten all the layers at once. Glue in this case is also not needed. The above method of fastening is faster and more reliable.

Attach a cardboard circle template on top, draw with a pencil or immediately on the eye, cut out a circle. Even if you get a slightly wrinkled edging, this will not cause any difficulties. This is exactly the effect that should be achieved.

Make random small cuts along the edge of each circle, moving the scissors about 0.5 cm inward. It is also allowed to make the outer edge wavy.

Now it remains to model the flower. Its splendor directly depends on the number of layers used. Starting from the top circle, begin to lift each layer up and push through with your fingers. Corrugated paper holds its shape well, so after creasing it will not straighten out. Collect the middle and continue this operation further.

So gradually process all the layers. Raise one circle up, press down from all sides. Circumferential notches will provide a lighter and more believable construction. After processing the last layer, you will see a weightless ball in front of you.