home » Plants » How to make a flower cornflower out of paper. Do-it-yourself daisies and cornflowers from paper

How to make a flower cornflower out of paper. Do-it-yourself daisies and cornflowers from paper

Making paper flowers is a very exciting creative process that brings benefits and pleasure not only to adults, but also to children. For adults, this activity allows you to escape from everyday worries and plunge into the world of creativity and fantasy, and for children it helps to develop creative abilities. Today we will talk about how to make a cornflower out of paper, because this is not a simple hand-made craft, but a piece of summer that you really want to take with you into the long and cold winter.

Currently, needlework is experiencing a real flowering - masters and craftsmen of handicrafts are able to create works of art out of nothing. At the same time, paper is the most popular material for various crafts. All types of paper products are used - from newspapers and magazines that are in every home, to paper towel rolls. In addition, the paper is well cut, glued, crumpled, bent, which gives a huge scope for fantasy and imagination.

In order to learn more about the technique of making this wild flower, we bring to your attention a step-by-step master class "Corrugated Paper Cornflower Flower".

Master class on creating a cornflower from corrugated paper with your own hands

Required materials and tools:

Corrugated paper in green, blue and dark blue;
Wire;
PVA glue;
Manka;
Scissors.

We cut out a strip 2 cm wide from dark blue corrugated paper, cut one side of it in the form of a “fence” and twist its sharp tips into thin tubes with our fingers.

We take a wire about 1 mm thick, from which we will make a stem, drip PVA glue on one edge and twist a strip with thin tubes around it.

The preparation of the core of the flower is ready. We put it aside to dry, and we ourselves proceed to the manufacture of the remaining parts.

We take a sheet of blue corrugated paper, fold it in half, cut out a strip of 3 cm and again cut one of its edges in the form of a “fence”.

These will be the outer petals of our flower. We cut them into pieces of three wedges and twist around a thin wire. At the same time, we do not leave the wire inside each petal - it only serves as a support for more reliable twisting of the paper.

You can also use templates of different sizes for the outer petals - with them the flower will turn out more realistic.

Let's start forming a flower. To do this, we take a blank of its central part and begin to glue the petals evenly in a circle, while forming the base of the flower, additionally securing the petals with a thread.

While the flower with the base dries, we make leaves. To do this, glue a sheet of green corrugated paper in two layers, then glue this sheet again, inserting a thin wire inside, which will serve as a vein of the leaf (leave a small tail outside to secure the leaf to the stem).

We cut out the leaves for the flower so that the vein wire is located approximately in the middle of the leaf.

We fasten the finished leaves onto the stem as you like best - you can arrange the leaves opposite each other, or you can checkerboard. After that, we cut out a long strip of green paper about 1 cm wide, coat it with glue on one side and wind it onto the wire, starting from the bottom and paying special attention to the places where the leaves are connected to the stem.

Now we need to draw the base of the flower. To do this, we take a glued sheet of green paper (from which the leaves were cut out), cut out a strip about 1 cm wide from it, turn it into a “fence” and wind it around the base of the flower.

The last step in making a paper cornflower will be the formation of pollen on the stamens, from which the central part of the flower is formed. To do this, pour a little PVA into a container, gently dip the core of the flower first into PVA, and then into semolina. The cornflower flower has become with pollen on the stamens.

In such a simple way, you can make whole bouquets of various flowers for the house, which will perfectly fit into any interior and fill the house with summer warmth and sunlight. In addition, even small children can be involved in the manufacture of such flowers - such work perfectly develops the creative abilities and fine motor skills of the child, and joint creativity has a good effect on further relationships between children and parents.

Video on the topic of the article

In conclusion, we invite you to watch a few videos on how you can still make cornflowers from the most ordinary paper quickly and step by step with your own hands to please your loved ones with original summer presents in the cold winter, or just take a break from everyday affairs and give free rein to your imagination.

Paper cornflowers

Continuing the theme of wild flowers for a bouquet - a master class on creating paper cornflowers. The lesson is based on the example of creating one flower.

To create a paper cornflower you will need:

Strips of paper 3mm wide;

corrugated paper;

PVA glue, wire.

Paper cornflowers step by step:

Initially make a twig with a cup of 2 strips 3mm wide (Pic 1-5). In previous MKs, this process has already been described (see).

Start creating details for the flower. There are certain nuances in the creation. So, cut the “fence” from single-layer, non-glued corrugated paper, while the folds of corrugated paper (reaper) should be located vertically on the “fence” (in the same plane as the “teeth”), and not across.

Cut the “fence” into pieces about 1.5-2 cm. The second nuance is that you need not just twist these pieces (just get a tube), but, holding it between your fingers, start moving them in different directions (as if you are rubbing something ). Thus, you will get a kind of bundle on the leg. If the paper folds are incorrectly arranged, the bundle will be difficult to collect.

Next, glue the bundles into the cup. When you glue the first circle (along the edge), let it dry and press it out. Then glue the second layer, then the middle. For the core, you need to slightly shorten the leg of the bundles.

In order to learn more about the technique of making this wild flower, we bring to your attention a step-by-step master class "Corrugated Paper Cornflower Flower".

Master class on creating a cornflower from corrugated paper with your own hands

Required materials and tools:

Corrugated paper in green, blue and dark blue;
Wire;
PVA glue;
Manka;
Scissors.

We cut out a strip 2 cm wide from dark blue corrugated paper, cut one side of it in the form of a “fence” and twist its sharp tips into thin tubes with our fingers.

We take a wire about 1 mm thick, from which we will make a stem, drip PVA glue on one edge and twist a strip with thin tubes around it.

The preparation of the core of the flower is ready. We put it aside to dry, and we ourselves proceed to the manufacture of the remaining parts.

We take a sheet of blue corrugated paper, fold it in half, cut out a strip of 3 cm and again cut one of its edges in the form of a “fence”.

You can also use templates of different sizes for the outer petals - with them the flower will turn out more realistic.

We cut out the leaves for the flower so that the vein wire is located approximately in the middle of the leaf.

Video on the topic of the article

The simplest and most affordable element for original interior decoration is flowers. Especially popular in recent years is decorating with wildflowers. They are perfect for creating light and airy compositions, with which in the future it will be possible to decorate the interior of almost any direction. But, unfortunately, not all wild flowers can retain their original appearance for a long time, so it is better to immediately replace some plants with artificial ones.

In today's master class, you will see detailed instructions for creating a field cornflower out of paper.

Let's prepare all the necessary materials:

corrugated paper in rich blue and light green tones;
thermal gun;
black threads;
scissors;
semolina;
thin wire.

First, let's create a blank for the base of the flower. For this we need black threads. We wind them on three fingers, do 50-60 turns. Next, remove the coils from the fingers and tie them with a piece of thread approximately in the center.

We cut the whole side parts.

The base of the stamens is ready!

Now we wind a green ribbon of corrugated paper on the wire. Pre-smooth the corrugated surface of the tape.

The flower stalk of the cornflower is ready!

We apply a drop of glue to the center of the stamen blank, and then attach it to the pedicel.

If the pile is too long, cut off the excess length with scissors. Next, secure the bottom of the threads with a strip of green corrugated paper.

To create pollen on the stamens, apply a little glue to the ends of the threads and lower their grits.

We create thin inner petals from blue paper. We cut the tape 25-30 cm long. Fold it four times, after smoothing out all the folds.

Now you need to create the large outer petals of the cornflower. Just like the previous tape, stretch it so that the wrinkles disappear, fold it six times and cut out miniature petals.

We begin to attach blanks to the base of the flower. First glue the inner petals, and then the outer ones.

To make large petals more fluffy, we fold them with an accordion before gluing.

We wrap the lower part of the blue petals with a thread.

Then glue a green strip to the receptacle with glue to hide the inside of the flower.

Here we have such a button.

Next, we create leaves. They can be cut from corrugated, crepe or regular colored paper, choose the material that suits you. Cornflower leaves are oblong in shape, and their tip has a rounded shape.

Leaves can be given a natural curved shape by stretching their middle.

We attach them to the stem with hot glue.

Cornflowers is a rather complicated paper application for children aged 7 years and older. The main difficulty for the guys is to carefully cut through the sidewalls of the flowers without hitting the middle. But all the work will pay off with the fact that the result will be gentle and airy work. For children of 7 years old, it is better to simplify the application somewhat - make not five, but three cornflowers. At the same time, the squares from which the flowers will be cut out must be increased. Then it will be much easier for the guys to cut.
To make the applique "Cornflowers" out of paper, we need:
A sheet of colored cardboard;
Blue or blue paper in two shades;
Green and orange colored paper
Glue
Scissors
Pencil
How to make an application from paper "Cornflower"
Step 1
We cut squares of blue paper in two shades and two sizes. Large square - 6x6 cm; small square - 5x5 cm. For each cornflower we need one large and one small square.
Step 2
Fold the square diagonally in half, then in half again, and then in half again.

Step 3
Now take scissors and start cutting. First round the wide part of our triangle. If you immediately take not squares, but circles, then this operation will not be needed. Then cut out the teeth on the edge of the flower. And lastly, we need to cut the sidewalls. Look carefully at how the line goes.

We unfold the paper - here is the cornflower flower! Cut out such flowers from all the prepared squares.
We glue in pairs small and large flowers.

Step 4
Take a sheet of yellow cardboard. Cut out an oval of any size from orange paper and paste it onto the cardboard base of the application.
Step 5
Let's attach ready-made cornflowers to the base of the application. Then, removing the flowers in turn, we mark their location with a pencil.

Step 6
Cut into thin (about 0.5 cm) strips-stalks. Glue them to the application. It is necessary to glue only in two places - at the intended point, where the flower will later be, and below. We cut off the excess length of the stems after gluing.

Step 7
Glue cornflowers on the base of the application.

Step 8
Let's make leaves. Take a rectangle measuring 12x4 cm and fold it in half. Draw the outline of the future leaf with a pencil.

Cut out the leaf along the marked line. Let's unfold the sheet. We will make 4-5 such leaves.